Philips DV900VHS0I owner manual Use the Number buttons I-8 to select a slot in which to

TimerRecording(cont'd)37

4

Use the Number buttons (I-8) to select a slot in which to

store the timer recording.There are eight slots. Numbers for open slots will flash on the screen.

NOTE."If you enter a number for a slot that has already been used ta store a timer recording,PREVIOUSLYSETPROGRAMwill appear on the screen briefly.Information about the program in that slot will appear on the screen.

If this happens, press the DISPLAYISTATUS/EXITbutton, then select another number.

©

v¢_

5

Use the Number buttons to enter theTV channel you want to record.

•Cable Users, enter channel numbers as a two-digit number for the quickest results. For example, to select channel 6, press 0,6. If you only press the Number 6 button, channel 6 will be selected after a brief delay.There also may be a brief delaywhen you select channels 10,_l,and 12. If you want to select channels 100 and above, enter channel numbers as a three-digitnumbeE For example, to select channel 117, press I, 1,7.

•Antenna Users, enter channel numbers as a two-digit number for the quickest results. For example, to select channel 5, press 0,5. If you only press the Number 5 button, channel 5 will be selected after a brief delay.You may only select channels 2-69.

•If you are recording from line input, press (3_0to select AV REAR.

•If you are usinga Cable Box/DBS, select the Cable Box/DBS out- put channel (03 or 04). Set the Cable Box/DBS to the channel you want to record. Leave the Cable Box/DBS on for the timer record- ing. Details are on page I0.

C3 133(33

.....

C_ _ C23

_C_C9

0 0 'O"'O"H_O_

PHILIPS

6

Press two Number buttons for the hour you want the recording to begin. Press two Number buttons for the minute you want the recording to begin. Press I forAM or 2

for PM, For example, for 9:30 PM, press 09, 30, 2.

PROGRAM	I
CHANNEL	10
TIME ON	- - - -

TO CORRECT PUSH CLEAR

END PUSH EXIT

7

Follow the instructions in step 6 to enter the recording's

stop time. (AM or PM will be set automatically.)

PROGRAMI

CHANNEL10

TIME ON 0930 PM

TIME OFF

TO CORRECT PUSH CLEAR

END PUSH EXIT

Instructions continue on page 38.

Helpful Hints

Entries that do not match the DVD/VCR'sclock or calendar will cause a question mark to appear

on the screen.

If you are recording from line input, connect the audio and video cables

to the AUDIO IN and VIDEO IN jacks on the back of the DVD/VCR. (Please see illustration on page 40.)