Philips DV900VHS0I owner manual TimerRecordingcontd39, Ee pae 78 for more hints

			TimerRecording(cont'd)39
CheckingBefore you orbegin,CancellingTimerplace the DVD/VCR		inVCRRecordingsmode.	2m 4
Press the DVD/VCR	OUTPUT button	so that theVCR light	/
appears on the front	of the DVD/VCR.

I

front of the DVD/VCR), press the VCR button, then press the

MENU button.

2

Press the PLAY button or the STOP button to select

PROGRAM, then press the F.FWD button.

3

Press the PLAY button or the STOP button to select

PROGRAM REVIEW, then press the F.FWD button, The timer recording informationfor the program in the lowest num- bered slot will appear on the screen. If no timer recordings are set, nothing will happen when you press the EFWD button.

4

Press the F.FWD button repeatedly to review all pro- grammed timer recordings. If you don't press the EFWD but-

ton within 10 seconds, the DVD/VCR witl automatically display

information about the next programmed timer recording.This will continue until all timer recordings have been displayed.Then the

menu will disappear.

5

To cancel the timer recording displayed, press the CLEAR button. Either the display wil! disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.

6

Repeat steps I-4 to make sure you have cleared the cor- rect timer recording.

-I

C3 €CD23 El(53 0

m

-I

Helpful Hints

CLASHmay flash on the screenwhen you ftnish settJnga timer recording. This means that the timer recording youjust programmed and another timer recordingoverlap.The current timer recordingwill not take place.You may choose to cancel the overlapping timer recording.

Tostop a started timer recording,press the STOP/EJECTbutton or the TIMER SET button on the front of the

DVDIVCR.

If the power fails for more than one minute, programmed timer recordings will be lost.If this occurs,repeat the steps on pages 16 and 20 before resetting the timer recordings.

If the preset time for a timer record- ing comes up during an OTR,the OTR has priority.A messagewill remind you when the timer recordingwas sched- uled to begin.Youmay let the OTR contJnue;the timer recordingwill not take place.Or,stop the OTRand press the TIMER SETbutton immediately. The timer recordingwill take place if you press the TIMER SETbutton before the timer recording'sscheduled start time.

;ee pa_e 78 for more hints.