Philips DV900VHS0I owner manual Press the Number 2 button to select Change Pass

	ParentalLockPassword67
You can change the password as often as you like.To do so, follow
these steps.
• Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVDNCR.	35
I	'
While playback is stopped, press the DVD button, then
)ress the SETUP button, The setup screen will appear.

SETUP

1LANGUAGE

2VIDEO

3AUDIO

4LOCK 50THEAS

2

Press the Number 4 button to select LOCK.

The SETUP/LOCK menu will appear.

PASSWOnO [ -- I

1	LEVEL	[NONE]
2	CHANGE	PASSWORD
	SETUP/LOCK
	_l_er _	Ba¢_

3

Press the Number buttons to enter the 4-digit password.

•When doing this for the first time, enter any 4 digits.That num- ber will be the password until you change it.

PASSWORD][ =_

1	LIEVEL	{NONE]
2	CHANGE	PASSWORD
	SETUP/LOCK
	Ether _	Bac_

4

Press the Number 2 button to select CHANGE PASS-

WORD. The first space in the PASSWORD will start flashing.

5

Press the Number buttons to enter your new password.

6

Press the RETURN button twice to remove the menu.

6

PHILIPS

...J

Helpful Hints

Wf_te dawn the password in case you forget it.

To erase the old password, press the POWER button to turn off•he DVD/VCR.Then, press and hold the DVD STOPbutton on the DVD/VCR

while pressing the POWER button on th_ DVD/VCR to turn on the

power again.When "HELLO" appears on the display panel, you may release the DVD STOPbutton. Follow the steps on this page to set the password that you desire.