Philips SRU 5086 Adding a function to the remote control, Assign Volume control to another mode

Instructions for use

Adding a function to the remote control

If you want to add a function to the SRU 5060, you can contact the

Philips service line for Universal Remote Control to ask for the 5-figure code for the extra function.

Assign Volume control to another mode

The volume controls (Volume +,Volume - and s) on the SRU 5060

are assigned to either your TV or your amplifier/receiver, depending on the

device you have selected;
MODE	VOLUME CONTROLS
TV mode selected	Volume controls work with TV
DVD mode selected	Volume controls work with TV
STB mode selected	Volume controls work with TV
VCR mode selected	Volume controls work with TV
CD mode selected	Volume controls work with amplifier/ receiver
AMP mode selected	Volume controls work with amplifier/ receiver

If you want a different setup, the volume control assignment can be changed. Example: In STB mode you want to operate the amplifier/receiver volume control

1Press the SELECT key to select STB.

Press the key until STB lights up in the selector window.

2Then keep keys 1 and 6 on the SRU 5060 pressed simultaneously for three seconds, until STB in the selector window flashes twice and then remains lit.

3Press keys 9, 9 and 3 in that order.

4Press the SELECT key to select AMP. Press the key until AMP lights up in the selector window.

English

5Press the OK key.

–AMP in the selector window flashes twice to confirm the new setup.You can now use the AMP volume controls in STB mode.

9