Getting the Settings Right
Note Buttons with text in red have no remote control code assigned to them. If you want to use these functions with your RC9800i, you can learn the codes individually using your original remote control. Some functions may not be available on your original remote; you can then safely disregard them.
4Select a function and choose Try.
■If the device doesn’t respond to the function, choose Learn and perform the procedure as described in steps
Tip You are strongly advised to verify that all functions that were available on your original remote are also available on the RC9800i and that they do work correctly. If you find that many functions do not work correctly, it is likely that a better matching set of codes can be found for your device. To find out if another set of codes can be found for your device, choose Resume.
■If the device responds correctly to the various functions, choose Next. A confirmation screen will appear.
Note If the Autoscan method was unable to determine the appropriate remote control codes, or if you don’t have the original remote, use the Select & Try method.
Select & Try
This method lets you select remote control codes and try them.
1In the screen for IR Setup, choose Select & Try.
The following screen will appear:
2Select a set of codes.
After choosing a codeset, you can try the
functions mentioned in the list, to check whether the selected set of codes works properly. The list is populated with all the functions that are relevant for the device type that you’re setting up.
3Select a button and choose Try.
If you feel the selected set of codes is not working properly, i.e. many functions do not trigger the appropriate action, you can select a different codeset to try.
Once you have identified the best matching codeset for your device, you can manually learn incorrect or missing functions (missing functions have no remote control codes assigned to them; they are marked in red.)
4When finished, choose Next. A confirmation screen will appear.
User Manual |
23 |