Getting the Most Out of It
■
User Manual |
29 |
Activities
In ‘What You Should Know About
Watching Cable TV
Tonight, a great movie is being broadcast. You’re going to have a cinema experience by watching it on your living room’s flat screen TV. With the RC9800i you select the cable box as the source that holds the content and the flat screen TV as the device you’ll be watching the movie on.
To do so, proceed as follows:
1On the Homepage, choose Watch.
The following screen will appear.
Note If you have multiple display devices in the room, the RC9800i will prompt you to select the display device you want to watch.
Note Icons in bottom bar may differ depending on the activities you have set up.
2Choose the cable box icon (the source that holds the content you
would like to enjoy).
The combined control screen will appear.
This indicates the number of pages available. Use the Page hard key to scroll through the pages.
These are the typical controls for watching television via a
cable box.
3Choose the digits corresponding to the channel you want to watch, the one that broadcasts the movie.
The RC9800i will send remote control codes to tune the cable box to the appropriate channel.
The RC9800i offers two ways to interact with the television and the cable box:
■Choose a soft button on the control button page;
■Press the hard keys on the RC9800i.
■Channel up/down to switch channels;
■Volume up/down/Mute to adjust the television’s volume;
■Home to go to the RC9800i Homepage.