Philips HDRW 720/00-02 Video + YPbPr, Cvbs + YPbPr, Please observe the colour sequence

Additional installation features

3Select the ' ' symbol using B or A and confirm with C .

Picture

TV shape	16:9
Black level shift
	Off
Video shift
	ï
SCART video
	RGB

4Select the line 'SCART video' using A or B and confirm with

C .

5Select your setting with B or A . If the YPbPr output (YUV signal) is switched on, S-video (Y/C) and video (FBAS/CVBS) signals will not be transmitted simultaneously.

The 'RGB' signal is switched off.

O 'S-video + YPbPr'

Component Video (YUV) and S-Video(Y/C).

GUIDE Plus+® menus only available on YUV ouput sockets.

O 'CVBS + YPbPr'

Component Video (YUV) and Video (FBAS/CVBS). GUIDE Plus+® menus only available on YUV ouput sockets.

With all other settings, the signal is switched off at the COMPONENT VIDEO OUT sockets. This will also be displayed as information on the screen.

For more information on the other settings, read section 'Picture settings' ('SCART video') in chapter 'User preferences'.

6Confirm with OK .

7Use a component video (Y Pb Pr) cable, connect the three cinch sockets (red, blue, green) COMPONENT VIDEO OUT at the back of the DVD recorder with the corresponding three component video (interlaced) input sockets of your TV set, usually labelled 'Component Video Input', 'YUV Input', 'YPbPr', 'YCbCr' or simply 'YUV'.

Warning!

Do not confuse these sockets with the five-component RGB sockets (if available) or the yellow video (CVBS/FBAS) socket and the two audio sockets (red/white). The five-component RGB sockets are only provided for the R-G-B-H-V signals (red, green, blue with horizontal and vertical synchronisation impulse).

Please observe the colour sequence

The colours of the sockets at the DVD recorder and the connectors must match those of the socket colours at the TV set (red-red/blue-blue/green-green). If they don't, the colours of the picture may get mixed up or the picture may not be visible.

8Use an audio (cinch) cable, connect the red/white cinch socket AUDIO OUT L/R at the back of the DVD recorder with the

most coloured red/white audio input socket of your TV set (usually labelled 'Audio in' or 'AV in'. See the instruction manual of your TV set.)

9If necessary, switch your TV set to the component video (Interlaced) input sockets. If there is a switch or selection on your TV-set between 'Interlaced' and 'Progressive scan' select 'Interlaced'. 'Progressive scan' will be not supported from this DVD-Recorder.

Also consult the instruction manual of your TV set.

P The menu of the DVD recorder should now appear on the TV screen. If not, check the cable connections and the settings on your TV set.

O If necessary store this setting on your TV set.

0End with SYSTEM MENU .

28