Philips HDRW 720/00-02 Sound settings, Digital output, Analogue output, Night mode

Page 77

Additional user preferences

O'S-Video'

Only the S-Video signal will be processed at both scart sockets ( EXT1 TO TV-I/Ooutput socket and EXT2 AUX-I/Oinput socket).

In case the scart socket of the TV set is not suitable for S-VIDEO (Y/C) signals, you will only see a black&white picture, although the recording will be made in colour.

Moreover, only the video (CVBS, FBAS) signal will be used for recordings via the EXT1 TO TV-I/Oscart socket.

Please observe that when making recordings from a video recorder that transmits only video (CVBS/FBAS) signals through the scart cable, recordings via scart socket EXT2 AUX-I/Omay be made in black and white.

Therefore, use this setting with caution.

O'CVBS only'

Only the video (CVBS/FBAS) signal is transmitted, regardless of the video signals (RGB, Y/C) at the scart sockets. This setting is selected automatically when no 'RGB' or 'S-VIDEO' signal is detected at the scart socket.

When selecting the settings 'S-Video' or 'CVBS only', the RGB signal is switched off.

The 'RGB' signal is switched off.

O'S-video + YPbPr'

Component Video (YUV) and S-Video(Y/C).

GUIDE Plus+® menus only available on YUV ouput sockets.

O'CVBS + YPbPr'

Component Video (YUV) and Video (FBAS/CVBS). GUIDE Plus+® menus only available on YUV ouput sockets.

With all other settings, the signal is switched off at the COMPONENT VIDEO OUT sockets. This will also be displayed as information on the screen.

Sound settings

You can select the settings in this menu depending on which audio outputs are used.

If you only use the analogue audio output (red and white socket AUDIO OUT L/R ), select the setting 'Off' in the 'Digital output' menu.

Digital output

All

Sound

 

ENGLISH

 

 

 

 

Analogue output

 

 

 

 

 

 

 

 

 

 

 

 

Stereo

 

 

 

Night mode

 

 

 

 

Off

 

 

 

 

 

 

'Digital output'

You can select one of the following settings for devices that are connected to the COAX OUT or OPTICAL OUT sockets:

O'All'

Dolby Digital and DTS signals are fed unaltered to the digital output. MPEG-2 multi-channel signals are converted to PCM (Pulse Code Modulation).

For receivers/amplifiers with digital multi decoders.

O'PCM only'

Digital and MPEG-2 multi-channel signals are converted to

PCM (Pulse Code Modulation). For receivers/amplifiers

without digital multi decoders

.

O'Off'

Digital output switched off.

For devices with analogue audio input.

'Analogue output'

You can select one of the following settings for devices that are connected to the analogue audio output ():

O'Stereo'

For devices without DolbySurround or TruSurround. Use this setting if the DVD recorder is only connected to a stereo TV set.

O'Surround'

Dolby Digital and MPEG-2 multi-channel are mixed down to a Dolby Surround-compatible two-channel output signal.

For devices with Dolby Surround / Pro Logic Decoder .

'Night mode'

Night mode optimises the sound for playback at low volume. You are therefore less likely to disturb your neighbours. This only works with Dolby Digital audio on DVD video discs.

75

Image 77
Contents Table of contents Glossar Remote control codes Access control Child LockDisc Manager DM User preferences for the HDDFunctioning of the device Overview of functionsCAM1 / Video CAM1 , DV in CAM2 Remote controlEnglish Additional TV functions Behind the flap at the right corner on the front Front of the deviceYellow socket White/red socket Audio R CAM1 Audio input socket left/rightOutput sockets AUDIO/VIDEO OUT Back of the deviceOutput sockets Digital Audio OUT Output socket GDiscs you can use IntroductionRecording and playback Playback onlyAccessories Technical dataRegional code AlaserCleaning the discs Symbols used in these operating instructionsCan I use a CD lens cleaner in the DVD recorder? Therefore, refrain from using a CD lens cleaner discSpecial functions of your DVD recorder Introduction Model NO. Hdrw 720/00-02 PROD. no Using your DVD remote control With your TV set Connecting the DVD recorderPreparing the remote control for operation Connecting to the TV Connecting to the aerialConnection with scart cable Several scart sockets on the TV?Connection with the aerial cable only Connection with an SConnection with video Cvbs cable Switch on the TV set Connecting to the mainsConnecting additional devices to the second scart socket Connecting additional devicesConnecting an external receiver Connecting a video recorder, DVD playerAerial cable Sockets Connect camcorder to the frontDigital DV input socket SocketConnecting audio devices to the digital audio sockets Connecting audio devices to the analogue audio socketsCan I use the Phono input on my amplifier? Digital multi-channel soundInitial installation InstallationWhy do I have to set the country? What is the subtitle language?Letterbox PanscanEXT2 Using a satellite receiverSound may be distorted on some TV channels Allocating a decoder Additional installation featuresManual TV channel search For and store the missing or coded TV channels manuallySorting TV channels automatically Follow TV Cannot switch my TV set to programme numberTV channel name, press C NicamWill appear in the display Switch off recorder, new preset appears on the screenAutomatic TV channel search Sorting and deleting TV channels manually Setting the languageDeleting TV channels Audio LanguageTime/date is displayed incorrectly despite manual setting Setting the timeCvbs + YPbPr Video + YPbPrPlease observe the colour sequence 0End with System MenuSetup General information Setting up the Guide Plus+ SystemGuide Plus+ System Time and date must have been setLanguage Installation of the External receiverCountry Postal codeMy brand is not included in the list Connecting G transmitterMy external receiver is connected only via aerial cable How do I find the right position?My external receiver does not display the programme number Want to install additional external receiversFinalise set Navigation in the Guide Plus+ System Using the Guide Plus+ SystemGeneral Choosing a TV channel from a listing Grid screenFunction buttons colour buttons in the Grid screen Function buttons colour buttons in the Schedule Screen Search screenThe Schedule screenFunction buttons colour buttons in the Search Screen Setup Setup screenInfo screen Editor screenGeneral Time shift Buffer What is the advantage from 1 hour and 6 hours?Recording on the HDD Mark TV shows for recording Symbols in the Time Shift BufferNavigation in the time shift buffer OTR recordings Manual recordingsMark part of a title Auto deleteDirect Record Switching Direct Record on or offAutomatic recording from a satellite receiver sat recording Recording from a camera connected to the front sockets Recording from a video recorder/DVD playerPlease observe Please observe the followingStop h You can stop the recording using the following buttonsPause Programming recordings with the Guide Plus+ System Programming a recording TimerGeneral Programming recordings with the ShowView System Programming recordings without the ShowView System Selecting a TV channel from the listing Changes using the colour buttonsFrequency Green function button Activate VPS/PDC Timing Yellow function buttonCancel a programmed recording in progress Playback from the HDD Additional playback featuresSearch by time RepeatMedia browser Zoom featureSymbols in the Media Browser Change order for the media browser Change title settingsTitle name Edit titleChange the name of the title Clear chaptersSelect Enter characters usingEditing recorded titles name Divide title Remove chapter marker Insert chapter markersPress Pause Press OK . The marker will be inserted Chapter is visible and can be hidden with the blue button Hide chapters sectionsArchiving of the edited title Hidden szenes were not copied on the DVD+RW/+RProtect disc against accidental recordings Recording on a DVD+RW/+RArchiving storing titles on a Playback from a disc Switch over to the actual TV channel during PlaybackGeneral notes on playback Inserting a discPlaying a DVD+RW/ +R disc Playing an MP3 CD When creating MP3 CDs please note the followingPlaying an audio CD Important notes for playbackPlaying a Super Video CD Searching a disc Additonal playback featuresStill picture Slow motionSearch by time Repeat/Shuffle play Scan featureRepeating a passage a Time entered will flash on the screenF symbol will be hidden Zoom featureCamera angle Select the audio languageManaging the disc contents Hiding chapters Switching quicklyDeleting chapter markers NumbersDividing titles Changing the index pictureHow can I select different chapters? Can I divide titles on DVD+R discs?Editing recording titles name You can delete the character using the red function buttonPlaying the entire title How can I enter the characters with the buttons 0..9 ?Select Erase this title using a or B and confirm with OK Erasing recordings/titles Disc settingsChanging the disc name Can titles be deleted from a DVD+R disc?Erasing DVD+RW Discs Finishing editingFinalising DVD+R discs General information Adding a disc to the Disc Manager Disc Manager DMSearching for a title in the Disc Manager Removing discs from the Disc ManagerSearching discs Audio User preferences for the HDDZoom Time searchCamera mode Record modeChapters HDD bufferDirect rec Safety SlotFilter Jump forwardFlush Buffer InstallationFollow TV Time/DateAdditional user preferences Picture settingsNight mode Sound settingsDigital output Analogue outputAdditional settings Language settingsAccess control Disk feature menuAuto resume Finalise discChild lock DVD and VCD Access control Child LockActivating/deactivating child lock Authorising a discConfirm with OK . Quit using D and System Menu Confirm Access control using CParental level control DVD video only Activating/deactivating parental level controlHave forgotten my code Changing the PIN codeInformation on the screen of your TV Symbols in the menu barField for temporary messages Status fieldMessages in the DVD recorder display Symbols on your DVD recorder displayAn empty title on a DVD+RW/+R is selected BImportant Before you call an engineerOPEN/CLOSE J Before you call an engineer Press GUIDE/TV DVD+RW disc cannot be played on certain DVD players BYou can finalise the disc using the following function Index screen flickers when a DVD+R is insertedPAL GlossarNtsc Finlux 208, 209, 211, 212, 250 333, 334 332 283 Remote control codesMGA 3103 605 4174/000 English DeutschTechnical data Philips Norge AS Philips PORTUGUESA, S.A Hdrw 720/00