Philips HDRW 720/00-02 Selecting a TV channel from the listing, Changes using the colour buttons

Programming a recording (TIMER)

8Enter the programme number of the TV channel using the number buttons 0..9

		Frequency		VPS/PDC	Home
,
Grid		Search		Schedule	Info
/Record					Freq. Timing
21-Oct	20:00 21:30		BBC1		Once +0

Selecting a TV channel from the listing

You can only use this function if data from the GUIDE Plus+® system is already available.

-Press the yellow function button. You will see an overview of all channels

-Select the TV channel you want to program using D , C , B , A . You can browse back or forth using CHANNEL q , CHANNEL r .

-Confirm with OK .

Programme numbers of the scart sockets 'EXT1' and 'EXT2' You can also program recordings from external sources.

-Select the corresponding input socket using B or A . 'EXT1' ( EXT1 TO TV-I/O), 'EXT2' ( EXT2 AUX-I/O).

-Confirm with OK .

Changes using the colour buttons

You can use the colour function buttons to make the following settings. Make sure that the right tile is selected.

'Frequency': Green function button

'Once': single recordings

'M-F': Repeated daily recordings (Monday to Friday).

'Mon': Repeated weekly recordings (every week on the same day, e.g. Monday).

Activate VPS/PDC ('Timing'): Yellow function button

Using this button, you can activate (appears) or deactivate ('VPS/PDC' disappears) 'VPS/PDC' in tile 'Timing'

9To find out how you can go back and change the data, read the section on 'How to change or delete a programmed recording (TIMER)'

If any of the TIMER blocks are in use, 'TIMER' will light up on the recorder display.

How to change or delete a programmed recording (TIMER)

Preparation:

•) The TV set is switched on, and, if necessary, the programme number for the DVD recorder has been selected.

•) the DVD recorder is switched on.

1Press TIMER s on the remote control while the DVD recorder is switched on.

P The 'Schedule' screen will appear.

		Frequency		VPS/PDC	Home
, Single recording
Grid		Search		Schedule	Info
/Record					Freq. Timing
21-Oct	20:00 21:30		BBC1		Once	+0
21-Oct	Matrix				Once	0

2Use B or A to select the programmed recording you want to change or delete.

Depending on the programming method (using GUIDE Plus+® system, with/without ShowView® system), it is not possible to carry out certain changes using the function buttons. Therefore, always check the function of the corresponding button (description in the colour field) before pressing the button.

Delete programmed recording

Press the red action button in the left tile.

Changing the TV channel

You can make this change only for recordings that were not set using the 'Grid' screen.

In the case of recordings using the 'Grid' screen, centre tile is not available.

-Select the centre tile with C .

-Press the yellow function button.

- Select the TV channel you want using B , A , D , C . Sender.

-Confirm with OK .

Activate VPS/PDC

Keep pressing the yellow function button in the right tile until 'VPS/PDC' appears in the 'Timing' line instead of the time.

If you programm a recording using the GUIDE Plus+® System, the VPS/PDC time will be taken automatically. VPS/PDC can be switched on or off without readjusting the start time.

Setting up repeat recordings

You can choose from the following settings in the right tile using the green function button:

'Frequency' ':Once': Once recordings

'M-F': Repeated daily recordings (Monday to Friday).

'Mon': Repeated weekly recordings (every week on the same day, e.g. Monday).

46