Philips HDRW 720/00-02 Symbols on your DVD recorder display, Messages in the DVD recorder display

Information on the screen of your TV

The symbols on your DVD recorder display

These symbols can light up on your DVD recorder display:

Multi-function display/text line •) Clock

•) Disc/title playing time •) Title name

•) Display of the programme number of the TV channel/playing time/channel name/function.

•) Display of information and alerts

•) Display of the title from the actual recording.

IIIIIIIIIIIIIIIPosition/Diskbar: Displays the current position on the HDD/disc.

Time Shift Buffer Displays the elapsed time. If all segments lits, the oldest recording will be deleted from the Time Shift Buffer. Play/Record: No segment will lit at the current position.

Pause: Flashing segment at the current position.

Stop: Nothing appears.

SAT An automatic recording from a satellite receiver (SAT recording) has been programmed.

TIMER A recording (timer) has been programmed

o((( A remote control signal has been received

VPS/PDC Video programming system / programme delivery control: A VPS or PDC code is transmitted for the selected TV program

LANG II During playback a 2-channel tone was detected or a 2-channel tone was received. 'I' or 'II' lights up depending on which sound channel has been selected

Messages in the DVD recorder display

￿￿￿￿￿￿￿

The following messages may appear in your DVD recorder display

￿￿￿￿ ￿￿￿ The DVD recorder is in initial installation mode. Switch the TV on, then read the paragraph on 'Initial installation' in 'Installing your DVD recorder'.

￿￿￿￿￿￿￿￿ No input signal available (signal inadequate or unstable)

￿￿￿￿The menu on the screen is active

￿￿￿￿￿￿￿ Disc tray opening

￿￿￿￿￿￿￿￿ Disc tray open

￿￿￿￿￿￿￿ Disc tray closing

￿￿￿￿￿￿￿ Disc being read

￿￿￿￿￿￿￿￿ Once recording has been successfully completed the table of contents is created.

￿￿￿￿￿￿￿￿ The menu structure is created after the first recording has been made on a new disc

￿￿￿￿￿￿￿￿ You received a copy-protected signal. This may come from a copy-protected DVD/videotape of a DVD/video player or from a TV channel.

During the display ￿￿￿￿ ￿￿￿￿no recording will be made. A running recording will be interrupted.

￿￿￿￿Please wait until this message disappears. The DVD recorder is busy performing a task.

￿￿￿￿￿￿ A disc has not been inserted for recording. If a disc has been inserted, it cannot be read.

￿￿￿￿Information about the inserted DVD is displayed on the screen

￿￿￿￿The DVD recorder is processing the changes to make the disc DVD compatible

￿￿￿￿￿￿￿ The entire DVD+RW is being erased

￿￿￿￿￿￿￿￿￿ The DVD+RW/+R inserted is either new or has been completely erased (no recordings).

￿￿￿￿￿￿￿￿￿ The DVD+RW/+R inserted is protected against recording. How to remove this protection you will read in the section 'Protect disc against accidental recordings' in the chapter 'Recording on a DVD+RW/+R' .

￿￿￿￿￿￿￿￿ The maximum number of titles per disc/HDD has been reached. The maximum number of titles on a disc is 48 and on the HDD 499.

￿￿￿￿￿￿￿ The maximum number of chapters within a title/or the disc has been reached. The maximum number of chapters is; DVD+RW/+R: within a title 99, on the disc 255 (spreaded over the whole disc)

82