Philips HDRW 720/00-02 operating instructions Press GUIDE/TV

Page 88

Before you call an engineer

PROBLEMSOLUTION

The wrong TV channel was decoded (recorded) after you programmed a recording using ShowView System.

bThe programme number of the TV channel is not available in the GUIDE Plus+® system or allocation is wrong.

To change or check the channel data, proceed as follows:

1Press GUIDE/TV .

2Press A .

3Select 'Editor' with C .

4Select the TV channel using B or A .

5Press C to go to the right tile.

In case you can receive the selected channel only via an external receiver, press the red button to select the corresponding source.

6Press the green button.

7Enter the programme number of the TV channel using the number buttons.

If the source you have selected is an external receiver, enter the programme number that you would also enter at the external receiver for this TV channel.

8 Confirm with OK .

There is no channel overview in the GUIDE Plus+® system

Missing or wrong TV channel in the 'Grid' screen

When you press GUIDE/TV the GUIDE Plus+® setup screen will appear

The external receiver does not always react to Remote control signal.

My external receiver switches automatically through the TV channels

There is picture or sound interference on TV reception:

Distorted sound coming from a connected hi amplifier

bDVD recorder is switched on: Switch off the DVD recorder to allow data transfer bThe TV channel that transmits the GUIDE Plus+® data is not set properly.

bExternal receiver (satellite receiver, set-top box, cable TV box, ...) (if available) is switched off: switch on the external receiver

bG-LINK cable is not connected: Connect the G-LINK cable and make the necessary settings to control the external receiver (see chapter 'The GUIDE Plus+® system', section 'Installation of the 'External receiver 1'').

bWrong local post code/country was entered

bPlease check your correct channel line up in the 'Grid' screen. Read therefore the section 'The 'Editor' screen.

bThe GUIDE Plus+® system was not completely installed or local post code was not entered.

1Check the settings

2Select the corresponding line using B or A and confirm with OK .

3For more information on the individual functions, see chapter 'The GUIDE Plus+® system', section 'Setting up the GUIDE Plus+® System'.

bThe Infrared (IR) Remote control signal interfere with the IR signal of the G-LINK transmitter. Put the G-LINK transmitter closer to the front of the external receiver.

bIf the DVD-Recorder is switched off ( STANDBY m button) the external receiver will be used from the GUIDE Plus+® system via the DVD-Recorder.

If you want to watch TV-Channels from the external receiver, you have to switch the DVD-Recorder on.

bBefore recording, select the recording mode as described in chapter 'Manual Recording', section 'Selecting the recording mode (quality)'.

bHave your aerial checked.

bYou will find information on how to change the TV system in 'Manual TV channel search' in 'Installing your DVD recorder'.

bThe DVD recorder is connected to the 'Phono-input' of your amplifier: This socket is provided only for a record players without a preamplifier. Select a different audio input.

86

Page 87 Page 89
Image 88
Page 87 Page 89
Contents Table of contents Access control Child Lock Glossar Remote control codesDisc Manager DM User preferences for the HDDOverview of functions Functioning of the deviceRemote control CAM1 / Video CAM1 , DV in CAM2English Additional TV functions Front of the device Behind the flap at the right corner on the frontYellow socket White/red socket Audio R CAM1 Audio input socket left/rightBack of the device Output sockets AUDIO/VIDEO OUTOutput sockets Digital Audio OUT Output socket GIntroduction Discs you can useRecording and playback Playback onlyTechnical data AccessoriesRegional code AlaserSymbols used in these operating instructions Cleaning the discsCan I use a CD lens cleaner in the DVD recorder? Therefore, refrain from using a CD lens cleaner discSpecial functions of your DVD recorder Introduction Model NO. Hdrw 720/00-02 PROD. no Preparing the remote control for operation Connecting the DVD recorderUsing your DVD remote control With your TV set Connecting to the aerial Connecting to the TVConnection with scart cable Several scart sockets on the TV?Connection with video Cvbs cable Connection with an SConnection with the aerial cable only Connecting to the mains Switch on the TV setConnecting additional devices Connecting additional devices to the second scart socketConnecting an external receiver Connecting a video recorder, DVD playerConnect camcorder to the front Aerial cable SocketsDigital DV input socket SocketConnecting audio devices to the analogue audio sockets Connecting audio devices to the digital audio socketsCan I use the Phono input on my amplifier? Digital multi-channel soundInstallation Initial installationWhat is the subtitle language? Why do I have to set the country?Letterbox PanscanSound may be distorted on some TV channels Using a satellite receiverEXT2 Additional installation features Allocating a decoderManual TV channel search For and store the missing or coded TV channels manuallyCannot switch my TV set to programme number Sorting TV channels automatically Follow TVTV channel name, press C NicamAutomatic TV channel search Switch off recorder, new preset appears on the screenWill appear in the display Setting the language Sorting and deleting TV channels manuallyDeleting TV channels Audio LanguageSetting the time Time/date is displayed incorrectly despite manual settingVideo + YPbPr Cvbs + YPbPrPlease observe the colour sequence 0End with System MenuGeneral information Setting up the Guide Plus+ System SetupGuide Plus+ System Time and date must have been setInstallation of the External receiver LanguageCountry Postal codeConnecting G transmitter My brand is not included in the listMy external receiver is connected only via aerial cable How do I find the right position?Finalise set Want to install additional external receiversMy external receiver does not display the programme number General Using the Guide Plus+ SystemNavigation in the Guide Plus+ System Function buttons colour buttons in the Grid screen Grid screenChoosing a TV channel from a listing Function buttons colour buttons in the Search Screen Search screenThe Schedule screenFunction buttons colour buttons in the Schedule Screen Setup screen SetupInfo screen Editor screenRecording on the HDD What is the advantage from 1 hour and 6 hours?General Time shift Buffer Navigation in the time shift buffer Symbols in the Time Shift BufferMark TV shows for recording Manual recordings OTR recordingsMark part of a title Auto deleteAutomatic recording from a satellite receiver sat recording Switching Direct Record on or offDirect Record Recording from a video recorder/DVD player Recording from a camera connected to the front socketsPlease observe Please observe the followingPause You can stop the recording using the following buttonsStop h General Programming a recording TimerProgramming recordings with the Guide Plus+ System Programming recordings with the ShowView System Programming recordings without the ShowView System Changes using the colour buttons Selecting a TV channel from the listingFrequency Green function button Activate VPS/PDC Timing Yellow function buttonCancel a programmed recording in progress Additional playback features Playback from the HDDSearch by time RepeatSymbols in the Media Browser Zoom featureMedia browser Change title settings Change order for the media browserEdit title Title nameChange the name of the title Clear chaptersEditing recorded titles name Divide title Enter characters usingSelect Press Pause Press OK . The marker will be inserted Insert chapter markersRemove chapter marker Hide chapters sections Chapter is visible and can be hidden with the blue buttonArchiving of the edited title Hidden szenes were not copied on the DVD+RW/+RArchiving storing titles on a Recording on a DVD+RW/+RProtect disc against accidental recordings Switch over to the actual TV channel during Playback Playback from a discGeneral notes on playback Inserting a discWhen creating MP3 CDs please note the following Playing a DVD+RW/ +R disc Playing an MP3 CDPlaying an audio CD Important notes for playbackPlaying a Super Video CD Additonal playback features Searching a discStill picture Slow motionRepeat/Shuffle play Scan feature Search by timeRepeating a passage a Time entered will flash on the screenZoom feature F symbol will be hiddenCamera angle Select the audio languageManaging the disc contents Switching quickly Hiding chaptersDeleting chapter markers NumbersChanging the index picture Dividing titlesHow can I select different chapters? Can I divide titles on DVD+R discs?You can delete the character using the red function button Editing recording titles namePlaying the entire title How can I enter the characters with the buttons 0..9 ?Erasing recordings/titles Disc settings Select Erase this title using a or B and confirm with OKChanging the disc name Can titles be deleted from a DVD+R disc?Finalising DVD+R discs Finishing editingErasing DVD+RW Discs Disc Manager DM General information Adding a disc to the Disc ManagerSearching discs Removing discs from the Disc ManagerSearching for a title in the Disc Manager User preferences for the HDD AudioZoom Time searchRecord mode Camera modeChapters HDD bufferSafety Slot Direct recFilter Jump forwardInstallation Flush BufferFollow TV Time/DatePicture settings Additional user preferencesSound settings Night modeDigital output Analogue outputLanguage settings Additional settingsDisk feature menu Access controlAuto resume Finalise discAccess control Child Lock Child lock DVD and VCDActivating/deactivating child lock Authorising a discConfirm Access control using C Confirm with OK . Quit using D and System MenuParental level control DVD video only Activating/deactivating parental level controlChanging the PIN code Have forgotten my codeSymbols in the menu bar Information on the screen of your TVField for temporary messages Status fieldSymbols on your DVD recorder display Messages in the DVD recorder displayAn empty title on a DVD+RW/+R is selected OPEN/CLOSE J Before you call an engineerBImportant Before you call an engineer Press GUIDE/TV DVD+RW disc cannot be played on certain DVD players Index screen flickers when a DVD+R is inserted BYou can finalise the disc using the following functionNtsc GlossarPAL Remote control codes Finlux 208, 209, 211, 212, 250 333, 334 332 283MGA English Deutsch 3103 605 4174/000Technical data Hdrw 720/00 Philips Norge AS Philips PORTUGUESA, S.A
Top Page Image Contents