Philips HDRW 720/00-02 Finalise set, My external receiver does not display the programme number

Page 34

The GUIDE Plus+® System

aMy external receiver does not display the programme number

During installation, the external receiver will be switched to a different programme number. If the receiver does not display the programme number, you must check the 'Video window' (left top corner in the GUIDE Plus+® system) to see whether switching has taken place.

-Select on the DVD-Recorder the socket where the receiver is connected using CHANNEL q , CHANNEL r (e.g. EXT2for EXT2 AUX-I/O)

-Please check the TV show in the 'Video window' in the left top corner of the screen.

-Check whether the picture changes during the next step ( OK button).

4Read the information on the screen carefully. Confirm with OK .

P The DVD recorder will now attempt to use the G-Link connection on the external receiver to select a different programme number (e.g.12). This programme number depends on your external receiver.

5Has the external receiver been switched to the programme number displayed on the screen?

If this is the case, select 'YES'.

If no switching has taken place, select 'NO'.

aMy external receiver has not switched to the other programme number.

-Check that the external receiver is connected and switched on.

-Check the connection and position of the G-LINK transmitter.

-For another attempt with a new code of the chosen brand, select 'NO'.

-Confirm with OK on the remote control.

-If the receiver has not switched yet, select 'NO' again and confirm with

OK . It may take several attempts for a receiver brand.

If you return to the setup screen after confirming 'NO', your receiver may not have been installed. Check the connections again.

-Tune your external receiver to the TV channel which transmits the GUIDE Plus+® data (see table in the section 'General information'). If this TV channel is available at the internal tuner of the DVD-recorder, select this channel.

-Wait till the GUIDE Plus+® data is loaded (24 hours) and try the switch over again.

The control data of the external receivers are automatically updated (completed) via the GUIDE Plus+® system. This is done through the aerial, the cable, or the external receiver. You do not need to bring the device to a service centre.

-If your receiver still does not switch, note the type and manufacturer of your external receiver and call the customer support service in your country. You will find the telephone number on the back of this instruction manual.

6Your external receiver has now been installed.

7Press OK to return to the setup overview.

aI want to install additional external receivers

When installing additional external receivers, please observe the following: The external receiver which is controlled by the G-LINK transmitter must be below the other additional receivers. The IR(infrared) remote control signal is reflected diagonally upwards and can therefore be used to control additional external receivers which are on top.

Finalise set

Setup

 

Home

Press Aor Bto select. Then press OK to confirm.

Setup

 

Choose item to set up :

 

Language

English

Country

United Kingdom

Postal code

XXXXX

External receiver 1

None

External receiver 2

None

External receiver 3

None

1Check the settings shown on the screen.

If the settings are not correct, choose the line in which you want to change the settings and confirm with OK .

2Press the green function button to leave the screen.

O If you want to view a demonstration of the GUIDE Plus+® system select 'View Demo' with B and confirm with OK . If you start the demo, programmed recordings can be deleted.

O If you do not want to see the demonstration of the GUIDE Plus+® system, end using GUIDE/TV .

3This completes the set-up process for the GUIDE Plus+® system.

4Switch the DVD-recorder to the TV channel which transmits the GUIDE Plus+® data. The right TV-channel for your country you will in the table in the chapter 'The GUIDE Plus+® system' in the section 'General information'.

Leave the DVD recorder switched on during the night to load the GUIDE Plus+® data.

The information will be available in the next 24 hours.

5If data are available check in the 'Editor' screen that the TV channel which transmits the GUIDE Plus+® data is allocated to the right programme number. Change the programme number if necessary.

32

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Table of contents Disc Manager DM Access control Child LockGlossar Remote control codes User preferences for the HDDOverview of functions Functioning of the deviceRemote control CAM1 / Video CAM1 , DV in CAM2English Additional TV functions Yellow socket Front of the deviceBehind the flap at the right corner on the front White/red socket Audio R CAM1 Audio input socket left/rightOutput sockets Digital Audio OUT Back of the deviceOutput sockets AUDIO/VIDEO OUT Output socket GRecording and playback IntroductionDiscs you can use Playback onlyRegional code Technical dataAccessories AlaserCan I use a CD lens cleaner in the DVD recorder? Symbols used in these operating instructionsCleaning the discs Therefore, refrain from using a CD lens cleaner discSpecial functions of your DVD recorder Introduction Model NO. Hdrw 720/00-02 PROD. no Preparing the remote control for operation Connecting the DVD recorderUsing your DVD remote control With your TV set Connection with scart cable Connecting to the aerialConnecting to the TV Several scart sockets on the TV?Connection with video Cvbs cable Connection with an SConnection with the aerial cable only Connecting to the mains Switch on the TV setConnecting an external receiver Connecting additional devicesConnecting additional devices to the second scart socket Connecting a video recorder, DVD playerDigital DV input socket Connect camcorder to the frontAerial cable Sockets SocketCan I use the Phono input on my amplifier? Connecting audio devices to the analogue audio socketsConnecting audio devices to the digital audio sockets Digital multi-channel soundInstallation Initial installationLetterbox What is the subtitle language?Why do I have to set the country? PanscanSound may be distorted on some TV channels Using a satellite receiverEXT2 Manual TV channel search Additional installation featuresAllocating a decoder For and store the missing or coded TV channels manuallyTV channel name, press C Cannot switch my TV set to programme numberSorting TV channels automatically Follow TV NicamAutomatic TV channel search Switch off recorder, new preset appears on the screenWill appear in the display Deleting TV channels Setting the languageSorting and deleting TV channels manually Audio LanguageSetting the time Time/date is displayed incorrectly despite manual settingPlease observe the colour sequence Video + YPbPrCvbs + YPbPr 0End with System MenuGuide Plus+ System General information Setting up the Guide Plus+ SystemSetup Time and date must have been setCountry Installation of the External receiverLanguage Postal codeMy external receiver is connected only via aerial cable Connecting G transmitterMy brand is not included in the list How do I find the right position?Finalise set Want to install additional external receiversMy external receiver does not display the programme number General Using the Guide Plus+ SystemNavigation in the Guide Plus+ System Function buttons colour buttons in the Grid screen Grid screenChoosing a TV channel from a listing Function buttons colour buttons in the Search Screen Search screenThe Schedule screenFunction buttons colour buttons in the Schedule Screen Info screen Setup screenSetup Editor screenRecording on the HDD What is the advantage from 1 hour and 6 hours?General Time shift Buffer Navigation in the time shift buffer Symbols in the Time Shift BufferMark TV shows for recording Mark part of a title Manual recordingsOTR recordings Auto deleteAutomatic recording from a satellite receiver sat recording Switching Direct Record on or offDirect Record Please observe Recording from a video recorder/DVD playerRecording from a camera connected to the front sockets Please observe the followingPause You can stop the recording using the following buttonsStop h General Programming a recording TimerProgramming recordings with the Guide Plus+ System Programming recordings with the ShowView System Programming recordings without the ShowView System Frequency Green function button Changes using the colour buttonsSelecting a TV channel from the listing Activate VPS/PDC Timing Yellow function buttonCancel a programmed recording in progress Search by time Additional playback featuresPlayback from the HDD RepeatSymbols in the Media Browser Zoom featureMedia browser Change title settings Change order for the media browserChange the name of the title Edit titleTitle name Clear chaptersEditing recorded titles name Divide title Enter characters usingSelect Press Pause Press OK . The marker will be inserted Insert chapter markersRemove chapter marker Archiving of the edited title Hide chapters sectionsChapter is visible and can be hidden with the blue button Hidden szenes were not copied on the DVD+RW/+RArchiving storing titles on a Recording on a DVD+RW/+RProtect disc against accidental recordings General notes on playback Switch over to the actual TV channel during PlaybackPlayback from a disc Inserting a discPlaying an audio CD When creating MP3 CDs please note the followingPlaying a DVD+RW/ +R disc Playing an MP3 CD Important notes for playbackPlaying a Super Video CD Still picture Additonal playback featuresSearching a disc Slow motionRepeating a passage a Repeat/Shuffle play Scan featureSearch by time Time entered will flash on the screenCamera angle Zoom featureF symbol will be hidden Select the audio languageManaging the disc contents Deleting chapter markers Switching quicklyHiding chapters NumbersHow can I select different chapters? Changing the index pictureDividing titles Can I divide titles on DVD+R discs?Playing the entire title You can delete the character using the red function buttonEditing recording titles name How can I enter the characters with the buttons 0..9 ?Changing the disc name Erasing recordings/titles Disc settingsSelect Erase this title using a or B and confirm with OK Can titles be deleted from a DVD+R disc?Finalising DVD+R discs Finishing editingErasing DVD+RW Discs Disc Manager DM General information Adding a disc to the Disc ManagerSearching discs Removing discs from the Disc ManagerSearching for a title in the Disc Manager Zoom User preferences for the HDDAudio Time searchChapters Record modeCamera mode HDD bufferFilter Safety SlotDirect rec Jump forwardFollow TV InstallationFlush Buffer Time/DatePicture settings Additional user preferencesDigital output Sound settingsNight mode Analogue outputLanguage settings Additional settingsAuto resume Disk feature menuAccess control Finalise discActivating/deactivating child lock Access control Child LockChild lock DVD and VCD Authorising a discParental level control DVD video only Confirm Access control using CConfirm with OK . Quit using D and System Menu Activating/deactivating parental level controlChanging the PIN code Have forgotten my codeField for temporary messages Symbols in the menu barInformation on the screen of your TV Status fieldSymbols on your DVD recorder display Messages in the DVD recorder displayAn empty title on a DVD+RW/+R is selected OPEN/CLOSE J Before you call an engineerBImportant Before you call an engineer Press GUIDE/TV DVD+RW disc cannot be played on certain DVD players Index screen flickers when a DVD+R is inserted BYou can finalise the disc using the following functionNtsc GlossarPAL Remote control codes Finlux 208, 209, 211, 212, 250 333, 334 332 283MGA English Deutsch 3103 605 4174/000Technical data Hdrw 720/00 Philips Norge AS Philips PORTUGUESA, S.A
Top Page Image Contents