Philips HDRW 720/00-02 Automatic recording from a satellite receiver sat recording, Direct Record

Page 42

Recording on the HDD

Direct Record

If the recording is manually started, the switched off DVD recorder receives the currently selected TV channel through the scart cable. The selected TV channel is compared with the stored TV channel of the DVD recorder. If the TV channel can be found, the DVD recorder selects it and starts the recording.

If no corresponding TV channel is found in the DVD recorder, an error message appears.

Read the next section 'Switching Direct Record on or off' on how to switch Direct Record on or off.

How does Direct Record work?

The DVD recorder compares the TV channel selected on the TV set with its stored TV channels via the scart cable. If the same TV channel is found, the DVD recorder switches to the corresponding programme number and starts recording.

Please do not change channel on the TV set during search. This may affect the tuning on the DVD recorder.

1Select the programme number on the TV set from which you want to make the recording.

2Press REC/OTR n while the DVD recorder is switched off .

a'￿￿￿￿' appears in the display

bThe DVD recorder compares its stored TV channels with those of the TV set. Please do not change channel on the TV set while '￿￿￿￿' appears in the display.

a'￿￿￿￿' appears on the display

bThis TV channel was not found in the memory of the DVD recorder. Check whether all TV channels stored in the TV set are available on the DVD recorder. If necessary, store the missing TV channels. Read section 'Manual TV channel search' in the chapter 'Installing your DVD recorder'.

b Check the connectors of the scart cable.

b Consult the instruction manual of your TV set to find out which scart socket sends out video signals.

b If all this is to no avail, you cannot use this function.

3To stop the recording press and hold the red function button on the remote control until the red light around the n button is switched off.

Switching 'Direct Record' on or off

1Press BROWSER HDD and then SYSTEM MENU button on the remote control.

P The 'SYSTEM MENU' appears.

2Select 'Preferences' with B .

3Press C to select 'Recording'.

4Select 'Direct rec.'(second menu page) using B .

5Select 'On' using C .

OTo switch off the function, select 'Off' using C .

6End with SYSTEM MENU .

Automatic recording from a satellite receiver (sat recording)

You can use this function if you have a satellite receiver that can control other devices via a scart cable and has a programming function (timer). For more information, consult the instruction manual of your satellite receiver.

1Switch on the TV set. If necessary, select the programme number for the DVD recorder.

2Press the BROWSER HDD and then the SYSTEM MENU button on the remote control.

P The 'SYSTEM MENU' appears.

3Select 'Preferences' with B .

4Press C to select 'Recording'.

5Select 'Sat record' (second menu page) using B .

6Select 'On' using C .

OTo switch off the function, select 'Off' using C .

7To end, press SYSTEM MENU .

8Connect the EXT2 AUX-I/Oscart socket of the DVD recorder with the corresponding scart socket of the satellite receiver using a scart cable.

9Program the satellite receiver with the desired data for recording (programme number of the TV channel, start time and end time). If necessary, also consult the instruction manual of your satellite receiver.

0Switch off the DVD recorder using STANDBY m .

P In addition, 'SAT' will appear in the display to indicate that the function is activated.

AIf necessary switch the satellite receiver to standby. See the instruction manual for the satellite receiver for details.

The DVD recorder is now ready for recording.

PThe start and the end of the recording will be controlled via the EXT2 AUX-I/Oscart socket.

40

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Table of contents Disc Manager DM Access control Child LockGlossar Remote control codes User preferences for the HDDOverview of functions Functioning of the deviceRemote control CAM1 / Video CAM1 , DV in CAM2English Additional TV functions Yellow socket Front of the deviceBehind the flap at the right corner on the front White/red socket Audio R CAM1 Audio input socket left/rightOutput sockets Digital Audio OUT Back of the deviceOutput sockets AUDIO/VIDEO OUT Output socket GRecording and playback IntroductionDiscs you can use Playback onlyRegional code Technical dataAccessories AlaserCan I use a CD lens cleaner in the DVD recorder? Symbols used in these operating instructionsCleaning the discs Therefore, refrain from using a CD lens cleaner discSpecial functions of your DVD recorder Introduction Model NO. Hdrw 720/00-02 PROD. no Connecting the DVD recorder Preparing the remote control for operationUsing your DVD remote control With your TV set Connection with scart cable Connecting to the aerialConnecting to the TV Several scart sockets on the TV?Connection with an S Connection with video Cvbs cableConnection with the aerial cable only Connecting to the mains Switch on the TV setConnecting an external receiver Connecting additional devicesConnecting additional devices to the second scart socket Connecting a video recorder, DVD playerDigital DV input socket Connect camcorder to the frontAerial cable Sockets SocketCan I use the Phono input on my amplifier? Connecting audio devices to the analogue audio socketsConnecting audio devices to the digital audio sockets Digital multi-channel soundInstallation Initial installationLetterbox What is the subtitle language?Why do I have to set the country? PanscanUsing a satellite receiver Sound may be distorted on some TV channelsEXT2 Manual TV channel search Additional installation featuresAllocating a decoder For and store the missing or coded TV channels manuallyTV channel name, press C Cannot switch my TV set to programme numberSorting TV channels automatically Follow TV NicamSwitch off recorder, new preset appears on the screen Automatic TV channel searchWill appear in the display Deleting TV channels Setting the languageSorting and deleting TV channels manually Audio LanguageSetting the time Time/date is displayed incorrectly despite manual settingPlease observe the colour sequence Video + YPbPrCvbs + YPbPr 0End with System MenuGuide Plus+ System General information Setting up the Guide Plus+ SystemSetup Time and date must have been setCountry Installation of the External receiverLanguage Postal codeMy external receiver is connected only via aerial cable Connecting G transmitterMy brand is not included in the list How do I find the right position?Want to install additional external receivers Finalise setMy external receiver does not display the programme number Using the Guide Plus+ System GeneralNavigation in the Guide Plus+ System Grid screen Function buttons colour buttons in the Grid screenChoosing a TV channel from a listing Search screenThe Schedule screen Function buttons colour buttons in the Search ScreenFunction buttons colour buttons in the Schedule Screen Info screen Setup screenSetup Editor screenWhat is the advantage from 1 hour and 6 hours? Recording on the HDDGeneral Time shift Buffer Symbols in the Time Shift Buffer Navigation in the time shift bufferMark TV shows for recording Mark part of a title Manual recordingsOTR recordings Auto deleteSwitching Direct Record on or off Automatic recording from a satellite receiver sat recordingDirect Record Please observe Recording from a video recorder/DVD playerRecording from a camera connected to the front sockets Please observe the followingYou can stop the recording using the following buttons PauseStop h Programming a recording Timer GeneralProgramming recordings with the Guide Plus+ System Programming recordings with the ShowView System Programming recordings without the ShowView System Frequency Green function button Changes using the colour buttonsSelecting a TV channel from the listing Activate VPS/PDC Timing Yellow function buttonCancel a programmed recording in progress Search by time Additional playback featuresPlayback from the HDD RepeatZoom feature Symbols in the Media BrowserMedia browser Change title settings Change order for the media browserChange the name of the title Edit titleTitle name Clear chaptersEnter characters using Editing recorded titles name Divide titleSelect Insert chapter markers Press Pause Press OK . The marker will be insertedRemove chapter marker Archiving of the edited title Hide chapters sectionsChapter is visible and can be hidden with the blue button Hidden szenes were not copied on the DVD+RW/+RRecording on a DVD+RW/+R Archiving storing titles on aProtect disc against accidental recordings General notes on playback Switch over to the actual TV channel during PlaybackPlayback from a disc Inserting a discPlaying an audio CD When creating MP3 CDs please note the followingPlaying a DVD+RW/ +R disc Playing an MP3 CD Important notes for playbackPlaying a Super Video CD Still picture Additonal playback featuresSearching a disc Slow motionRepeating a passage a Repeat/Shuffle play Scan featureSearch by time Time entered will flash on the screenCamera angle Zoom featureF symbol will be hidden Select the audio languageManaging the disc contents Deleting chapter markers Switching quicklyHiding chapters NumbersHow can I select different chapters? Changing the index pictureDividing titles Can I divide titles on DVD+R discs?Playing the entire title You can delete the character using the red function buttonEditing recording titles name How can I enter the characters with the buttons 0..9 ?Changing the disc name Erasing recordings/titles Disc settingsSelect Erase this title using a or B and confirm with OK Can titles be deleted from a DVD+R disc?Finishing editing Finalising DVD+R discsErasing DVD+RW Discs Disc Manager DM General information Adding a disc to the Disc ManagerRemoving discs from the Disc Manager Searching discsSearching for a title in the Disc Manager Zoom User preferences for the HDDAudio Time searchChapters Record modeCamera mode HDD bufferFilter Safety SlotDirect rec Jump forwardFollow TV InstallationFlush Buffer Time/DatePicture settings Additional user preferencesDigital output Sound settingsNight mode Analogue outputLanguage settings Additional settingsAuto resume Disk feature menuAccess control Finalise discActivating/deactivating child lock Access control Child LockChild lock DVD and VCD Authorising a discParental level control DVD video only Confirm Access control using CConfirm with OK . Quit using D and System Menu Activating/deactivating parental level controlChanging the PIN code Have forgotten my codeField for temporary messages Symbols in the menu barInformation on the screen of your TV Status fieldSymbols on your DVD recorder display Messages in the DVD recorder displayAn empty title on a DVD+RW/+R is selected Before you call an engineer OPEN/CLOSE JBImportant Before you call an engineer Press GUIDE/TV DVD+RW disc cannot be played on certain DVD players Index screen flickers when a DVD+R is inserted BYou can finalise the disc using the following functionGlossar NtscPAL Remote control codes Finlux 208, 209, 211, 212, 250 333, 334 332 283MGA English Deutsch 3103 605 4174/000Technical data Hdrw 720/00 Philips Norge AS Philips PORTUGUESA, S.A
Top Page Image Contents