Philips HDRW 720/00-02 Parental level control DVD video only, Confirm Access control using C

Access control (Child Lock)

Parental level control (DVD video only)

Films on pre-recorded DVD discs may contain scenes not suitable for children. Therefore, some discs may contain 'Parental Control' rating information that applies to the entire disc or to certain scenes on the disc.

The appropriate scenes have filter values that reach from 1-8. If such a scene is detected during playback, the filter value set on the DVD recorder is compared to the scene. If the filter value is higher than the setting, an alternative scene will be played (if available).

Most DVDs apply the rating to an entire DVD. Therefore, if certain scenes exceed the rating you select, the entire disc will be blocked from viewing.

Activating/deactivating parental level control

Preparation:

•) The TV set is switched on, and if necessary, the programme number for the DVD recorder has been selected.

•) the DVD recorder is switched on.

1Press DISC MENU and then SYSTEM MENU on the remote control.

P The menubar appears.

2Select the 'A' icon using D or C .

3Press the SYSTEM MENU button on the remote control.

4Select the 'A' icon using D or C .

5Select ' (Disc features)' using B or A and confirm with C .

	Disc features
Access control	Enter code
Auto resume
	On

6Confirm 'Access control' using C .

7Enter a 4-digit code of your choice. If the code is new, you may have to enter the code a second time as confirmation.

8Select the 'Parental level' using A or B and confirm with C . A bar appears to select the parental level.

9Select the appropriate rating using B , A or the number buttons 0..9 .

What do the ratings mean?

Rating 0 (displayed as '--') parental control not active.

Rating 1 (suitable for children)

Rating 8 (only suitable for adults)

What happens if a DVD scene contains a higher level than the rating set?

If the recorder does not find a suitable alternative, playback will stop and you must enter the four-digit code.

0Confirm with OK . Quit using D and SYSTEM MENU .

Changing the country ENGLISH

The set filter values depend on the respective country. It is therefore necessary to enter the country to which these filter values apply.

Preparation:

•) The TV set is switched on, and if necessary, the programme number for the DVD recorder has been selected.

•) the DVD recorder is switched on.

1Press the TUNER and then the SYSTEM MENU button on the remote control.

P The menubar appears on the screen.

2Select the 'A' icon using D or C .

3Select line ' (Disc features)' using B or A and confirm with

C .

	Disc features
Access control	Enter code
Auto resume
	On

4Confirm the line 'Access control' using C .

5Enter your four-digit code. If the code is new, you may have to enter the code a second time as confirmation.

6Select 'Change country' using B or A and confirm with C .

7Select the corresponding country using A or B and confirm with OK .

8To end, press D and then SYSTEM MENU .

79