Philips CCC134, CCC194 owner manual Real-Time Counter Memory, Appear on the screen

42 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.

1

Press the COMBI button. Then, play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape.

2

Press the STATUS/EXIT button. The real-time counter will

appear on the screen.

01:08 PM	STOP
CH10

SLP 1 : 23 : 45

3

While the counter remains on the screen, press the CLEAR button to reset the real-time counter to zero.

0 : 00 : 00

4

While the counter remains on the screen, press the MEM- ORY button so that M appears on the screen. To erase a real-time counter memory, press the MEMORY button so that the M disappears from the screen.

M 0 : 00 : 00

5

To go to the tape location where you set the real-time counter to zero, press the REW(ind)/s button or the F.FWD/B button when playback is stopped. When the tape reaches the point at which you set the counter to zero, the tape will stop. Press the PLAY/o button to watch the tape.

2

	EJECT		POWER		3
	MENU	STATUS	CLEAR	FM
		/EXIT
	1	2		3
	4	5		6
	7	8		9
	SLEEP/			ALT.CH
	WAKE UP	0
	REC			PAUSE
	/OTR	PLAY		/STILL
	REW		F.FWD
1		STOP
	CH.			VOL.
		MUTE
	CABLE	COMBI		SMART
	/DBS			PICTURE
4		SPEED	MEMORY VCR PLUS+
	F.ADV		SLOW	ENTER
	TRACKING		VAR.SLOW
		INDEX		SKIP
			SEARCH

1,5

Helpful Hints

•The real-time counter memory will not function during Repeat Play mode. Details are on page 43.

•You may only set one real-time counter memory at a time. If you set the real-time counter to zero at a second location, the previous real- time counter to zero setting will be lost.