Philips CCC194, CCC134 owner manual Helpful Hints cont’d

Page 63

Helpful Hints (cont’d) 63

The remote control is not available, or the remote control will not access the menu.

•Use the buttons on the front of the TV/VCR to access the menu. You can not enter numbers (for example, to program a timer recording) using the front panel buttons. Details are on page 22.

TV/VCR has no power.

•Connect the power cord to an AC (alternating current) outlet completely.

TV/VCR does not have a picture.

•Adjust the antenna. Details are on page six.

•Adjust the TV/VCR picture controls. Details are on pages 26-27 and 58.

•Select an active channel.

TV/VCR has poor sound or no sound.

•Adjust the volume.

•Press the MUTE button to restore the volume.

Tape playback is poor or tape is destroyed.

•Adjust the tracking. Details are on page 57.

•If moisture has accumulated in your TV/VCR, keep the power on for at least two hours, but do not try to play a tape. Details are on page 62.

TV/VCR does not display closed captions.

•Make sure COUNTER ONLY is OFF. Details are on page 28.

•Make sure closed captioning is available for the program. Refer to the TV listings in your local newspaper.

Remote control does not operate TV/VCR.

•Press the COMBI button, then try the other TV/VCR buttons.

•Aim the remote control directly at the TV/VCR’s remote sensor. Details are on pages five and 22.

•Remove all obstacles between the remote control and the TV/VCR.

•Inspect and replace the batteries in the remote control. Details are on page five.

Number buttons will not select channels above 69.

•Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter channel numbers as a three-digit number. Details are on page 24.

You can not insert a tape into the TV/VCR.

•Insert the tape window side up, with the record tab facing you.

•Make sure a tape isn’t already in the TV/VCR by pressing the STOP/EJECT button on the TV/VCR.

•Gently push on the center of the tape. Never force a tape into the TV/VCR.

•If you have set a timer recording and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is missing.

You can not remove the tape from the TV/VCR.

•Make sure the power plug is connected completely to an AC (alternating current) outlet.

•If a timer recording is programmed, turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording.

•Unplug the power cord for five minutes. Then, plug in the power cord again, then press the POWER button on the TV/VCR. If the tape does not eject, press the STOP/EJECT button on the TV/VCR three to five times. If the tape still does not eject, you may need to have an authorized servicer remove the tape.

TV/VCR ejects the tape when you try to start a recording.

•Make sure the tape has a record tab. Details are on page five.

The cylinder rotates when tape playback is stopped.

•To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal. The quick play mechanism switches the tape mechanism from Stop to Play in just one second.

Page 62 Page 64
Image 63
Page 62 Page 64
Contents Color TV with built-in VCR Model No Serial No Dear Philips product ownerFor Customer Use This bolt of lightning indi- cates uninsulated materialDeclaration of Conformity FeaturesSafety Precautions IntroductionTable of Contents TV/VCR Maintenance Putting Batteries in the Remote ControlBattery Safety Using the Remote ControlRod Antenna Hook up your TV/VCR using one of the connections shownHooking Up the TV/VCR RF coaxial cable Not suppliedCable Plug Hooking Up the TV/VCR cont’dBent pin Crooked Pin Straight PinPress the Menu button. The screen shown below will appear Turning On the TV/VCRPress the Combi button, then press the Menu button Language SelectionWait for the TV/VCR to set up channels Automatic Channel SetupProgramming of the last channel you selected will appear Adding/Deleting ChannelsPress the PLAY/o button or the STOP/p button to select Repeat steps 3-4 to add or delete other channelsSetting the Clock Manual Clock SettingCable Box users must set the clock manually Setting the Clock cont’d Automatic PBS Channel Selection Setting the Clock cont’dWait for the TV/VCR to find TimeNOW Searching flashes on the TV/VCR screen Manual PBS Channel Selection Wait for the TV/VCR to find the time Use the Number buttons to select your PBS stationDaylight-Savings Time Time Zone Remember the two-digit number beside it Setting the Remote to Operate a Cable Box/DBSFind your code Find the brand of your Cable Box/DBS on the lists belowYou have a Zenith Cable Box, press Number buttons 0 Repeat . If the remote control works your CableWithin 30 seconds, press the Number buttons to enter Two-digit code for your Cable Box/DBS. For example, ifFront Panel Connect your antenna or cable here AC Power CordRear Panel ANTenna JackRemote Control Buttons Remote Control Buttons cont’d Adjusting the Picture Controls Decreased brightness Decrease IncreaseIf you select Status OFF On-Screen Status DisplaysIf you select Status ON, then select Counter only OFF If you select Status ON, then select Counter only onPlaying Follow the steps below to play a tapeInsert a tape in the TV/VCR Power button to turn on the TV/VCR, if necessary RecordingPress the RECord/OTR button once to start recording Press the STOP/EJECT but- ton on the TV/VCR to stop the OTR One-Touch RecordingDifferent brands of equipment may operate differently Rerecording Tape DuplicationFollow the steps below to prevent accidental recording Defeat RecordingDaily Timer RecordingTimer Recording cont’d Timer Recording cont’d Checking or Clearing Timer Recordings Setting Up the VCR Plus+ Programming System TV ChannelsStation Examine the lists on Setting Up the VCR Plus+ Programming System cont’dYou have completed the steps on pages Press the Combi button, then press the VCRPLUS+/ENTER button Timer Recording With the VCR Plus+ Programming System cont’d Appear on the screen Real-Time Counter MemoryTV programming will appear while the tape is rewinding Repeat PlayPress the PLAY/ button or the STOP/ button to select B Repeat PlayRepeat Play cont’d Viewing a Still Picture Playback OptionsForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPBlue Background SmartLock SmartLock cont’d Ratings are defined onExample Specific Sub-ratings Use the Number buttons to enter your old access code To change the access code, follow these stepsRating Explanations Press the Combi button, then press the SLEEP/WAKE UP button Sleep TimerWake Up Timer Screen Closed CaptionExample MenuClosed Caption cont’d Standard Closed CaptionsHalf-screen text Volume Bar Volume BarUsually, the volume bar appears when you press the VOLume Automatic Operation Features SmartPicture TV ResetFM Radio Switching the AntennasReminder ReminderTape in the TV/VCR Index SearchHelpful Hints Helpful Hints cont’d Glossary Specifications Limited Warranty Please contact Philips at French Speaking English SpeakingModel # Serial # Index Supplied Accessories Supplied Accessories
Top Page Image Contents