Philips CCC134, CCC194 owner manual Recording, Power button to turn on the TV/VCR, if necessary

Page 30

30 Recording

Read and follow the steps below to record a TV program.

1

Press the COMBI button, then place a tape with its record tab intact (see page five) in the TV/VCR. The power will come on. Or, if the tape is already in the TV/VCR, press the

POWER button to turn on the TV/VCR, if necessary.

2

Press the SPEED button until the desired tape speed appears on the TV/VCR screen. See tape speed details below.

3

Use the CH(annel) o/p buttons or the Number buttons to select the channel you want to record. You can not change

channels during recording.

4

Press the REC(ord)/OTR button once to start recording.

The Record light will glow.

If there is not a tape in the TV/VCR, NO CASSETTE flashes on the screen briefly.

If the tape does not have a record tab, PROTECTED CAS- SETTE CANNOT RECORD flashes on the screen briefly. The TV/VCR will eject the tape. Insert another tape.

5

To pause the recording (for example, during commer- cials), press the PAUSE/STILL button. The Record light will flash. To resume recording, press the PAUSE/STILL but- ton again or the REC(ord)/OTR button. The Record light will glow.

6

To stop recording, press the STOP/button.

Tape Speeds

This chart shows the recording/playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP. A tape will play only in the speed in which it was recorded. You cannot record in LP speed on this TV/VCR. When recording, change the tape speed using the SPEED button.

 

Cassette type / Playback Time

Tape Speed

T160

T120

T60

SP(Standard Play)

2 hrs.

2

hrs.

1 hr.

 

40 mins.

 

 

 

 

LP(Long Play)

5 hrs.

4

hrs.

2 hrs.

(playback only)

20 mins.

 

 

 

 

 

 

 

 

SLP(Super Long Play)

8 hrs.

6

hrs.

3 hrs.

 

 

 

 

 

 

 

 

 

1

 

 

EJECT

 

POWER

 

 

 

 

 

 

 

 

MENU

STATUS

CLEAR

FM

 

 

/EXIT

 

3

1

2

 

3

 

4

5

 

6

 

7

8

 

9

5

SLEEP/

 

 

ALT.CH

WAKE UP

0

 

 

 

 

 

 

REC

 

 

PAUSE

 

/OTR

PLAY

/STILL

 

REW

F.FWD

4

 

 

STOP

 

 

CH.

 

 

VOL.

6

 

 

MUTE

 

 

CABLE

COMBI

 

SMART

2

/DBS

 

PICTURE

1

 

SPEED

MEMORY VCR PLUS+

F.ADV

 

SLOW

ENTER

 

TRACKING

VAR.SLOW

 

 

 

INDEX

 

SKIP

 

 

 

 

SEARCH

 

Helpful Hints

You cannot record one channel while watching another.

Recording options are on pages 31-41.

You cannot record if DEFEAT RECORDING is ON. (REC DEFEAT- ED will flash on the screen.) Details are on page 33.

If you pause a recording for more than five minutes, the TV/VCR will switch to Stop mode automatically to protect the video cassette tape from damage.

You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.

Image 30
Contents Color TV with built-in VCR This bolt of lightning indi- cates uninsulated material Dear Philips product ownerFor Customer Use Model No Serial NoIntroduction FeaturesSafety Precautions Declaration of ConformityTable of Contents Using the Remote Control Putting Batteries in the Remote ControlBattery Safety TV/VCR MaintenanceRF coaxial cable Not supplied Hook up your TV/VCR using one of the connections shownHooking Up the TV/VCR Rod AntennaCrooked Pin Straight Pin Hooking Up the TV/VCR cont’dBent pin Cable PlugTurning On the TV/VCR Press the Menu button. The screen shown below will appearLanguage Selection Press the Combi button, then press the Menu buttonAutomatic Channel Setup Wait for the TV/VCR to set up channelsRepeat steps 3-4 to add or delete other channels Adding/Deleting ChannelsPress the PLAY/o button or the STOP/p button to select Programming of the last channel you selected will appearSetting the Clock Manual Clock SettingCable Box users must set the clock manually Setting the Clock cont’d Setting the Clock cont’d Automatic PBS Channel SelectionWait for the TV/VCR to find TimeNOW Searching flashes on the TV/VCR screen Manual PBS Channel Selection Use the Number buttons to select your PBS station Wait for the TV/VCR to find the timeDaylight-Savings Time Time Zone Find the brand of your Cable Box/DBS on the lists below Setting the Remote to Operate a Cable Box/DBSFind your code Remember the two-digit number beside itTwo-digit code for your Cable Box/DBS. For example, if Repeat . If the remote control works your CableWithin 30 seconds, press the Number buttons to enter You have a Zenith Cable Box, press Number buttons 0Front Panel ANTenna Jack AC Power CordRear Panel Connect your antenna or cable hereRemote Control Buttons Remote Control Buttons cont’d Adjusting the Picture Controls Decrease Increase Decreased brightnessIf you select Status ON, then select Counter only on On-Screen Status DisplaysIf you select Status ON, then select Counter only OFF If you select Status OFFPlaying Follow the steps below to play a tapeInsert a tape in the TV/VCR Power button to turn on the TV/VCR, if necessary RecordingPress the RECord/OTR button once to start recording One-Touch Recording Press the STOP/EJECT but- ton on the TV/VCR to stop the OTRRerecording Tape Duplication Different brands of equipment may operate differentlyDefeat Recording Follow the steps below to prevent accidental recordingTimer Recording DailyTimer Recording cont’d Timer Recording cont’d Checking or Clearing Timer Recordings Setting Up the VCR Plus+ Programming System TV ChannelsStation Setting Up the VCR Plus+ Programming System cont’d Examine the lists onYou have completed the steps on pages Press the Combi button, then press the VCRPLUS+/ENTER button Timer Recording With the VCR Plus+ Programming System cont’d Real-Time Counter Memory Appear on the screenRepeat Play TV programming will appear while the tape is rewindingB Repeat Play Press the PLAY/ button or the STOP/ button to selectRepeat Play cont’d Super High Speed Searching LP/SLP Playback OptionsForward and Reverse Searching SP/LP/SLP Viewing a Still PictureBlue Background SmartLock SmartLock cont’d Ratings are defined onExample Specific Sub-ratings To change the access code, follow these steps Use the Number buttons to enter your old access codeRating Explanations Sleep Timer Press the Combi button, then press the SLEEP/WAKE UP buttonWake Up Timer Menu Closed CaptionExample ScreenClosed Caption cont’d Standard Closed CaptionsHalf-screen text Volume Bar Volume BarUsually, the volume bar appears when you press the VOLume Automatic Operation Features TV Reset SmartPictureSwitching the Antennas FM RadioReminder ReminderIndex Search Tape in the TV/VCRHelpful Hints Helpful Hints cont’d Glossary Specifications Limited Warranty Please contact Philips at French Speaking English SpeakingModel # Serial # Index Supplied Accessories Supplied Accessories