Philips DVDR3360H user manual Before Recording, Marking the contents for recording

Before Recording

English

About temporary HDD storage/Time Shift video bar

The current TV programme will be stored in the temporary hard disk storage called ‘TSB’ (Time Shift Buffer) once the recorder is turned on. It will continuously store up to 6 (six) hours of TV programmes.

The Time Shift video bar will appear on the TV. It indicates the status and timing of the TV programmes stored in the temporary HDD storage. You can choose to display or remove the video bar by pressing the INFO m button on the remote control.

21:00 23:13

The Time Shift video bar consists of the following information:

aThe TV programme start time.

Once it has exceeded 6 (six) hours, the beginning of the contents will be deleted and the start time will be changed accordingly.

bRemaining space in the temporary storage.

cClips that are selected to be recorded onto the HDD (marked Red).

dCurrent position and time of the TV programme broadcast.

eTitle markers (when you switch to a TV channel for more than 1 minute, a new title marker will be created)

fPresent time

gProgramme information

In addition, executing the following actions will also clear the contents in the temporary HDD storage :

–Press CAM on the remote control.

–Enter to { Setup } or { Record mode } option in the system setup menu.

This action will clear the Time Shift Buffer.

Do you want to continue?

Yes

No

i)To proceed and clear the contents in the temporary HDD storage, press OK on the remote control to select { Yes } in the menu, OR

ii)Select { No } in the menu and press OK on the remote control to abort.

Marking the contents for recording

You need to ‘mark’ the contents in the temporary HDD storage before it can be recorded to the hard disk drive (HDD), see page 39.

To select a title (programme) Press INFO m to show the overview

panel and use keys to select a title.

To find a scene within the title

Use keys.

To record the programme currently highlighted on the time shift buffer

Press (RECORD) once.

Note: In the countries where no GUIDE Plus+ TV listings data is available or no such data is stored, pressing RECORD will start recording the current channel from the last channel marker onwards for the next 6 (six) hours. Press RECORD repeatedly to set the recording length by 30-minute increments.

Warning!

The temporary HDD can only store up to 6 hours of TV programmes. All the contents will be cleared when you press STANDBY-ON 2 to turn off the recorder.

To mark the start of recording from the current scene

Press the Red button.

To mark the end of recording

Press (STOP).

To cancel the marked recording

Press the Red button.

36