Philips DVDR3360H user manual Recording from an external device VCR/DVD player

Record to Hard Disk or recordable DVD (continued)

Recording from an external device (VCR/DVD player)

You can record from an external device which is connected to this recorder’s input socket. Copy-protected material cannot be recorded on this recorder.

IMPORTANT!

It is not possible to record the disc playback from this recorder to its HDD.

A Connect the external device to this recorder (see page 22).

B Turn on the TV to the correct programme number for the recorder (e.g. ‘EXT’, ‘0’, ‘AV’).

C Turn on the recorder and press CAM on the remote control.

Media type selection screen appears.

D To continue, select to record to { Hard Disk } or { Recordable DVD } in the menu and press OK to confirm.

All the contents in the temporary

HDD storage will be cleared except for the ‘marked’ recordings.

Otherwise, select { Cancel } in the menu and press OK to abort the operation.

E Press CH +/- repeatedly to select the correct input channel that matches the connected socket of the device.

{CAM 1 } : S-VIDEO or VIDEO socket at the front.

{EXT 1 } : EXT1 TO TV-I/O scart socket at the back.

{EXT 2 } : EXT2 AUX-I/O scart socket at the back.

F Start playback on the connected device. G Press (RECORD) to start recording.

To pause the recording, press Å (PAUSE). To continue recording, press Å (PAUSE) again.

You can use this function to avoid unwanted recording.

A new chapter marker is created after recording restarts.

H To stop the recording, press (STOP). I To exit, press TUNER.

Helpful Hint:

–If ‘X’ appears at the bottom of the TV screen, it means that there is no video signal received from the current input channel.

English

TIPS: Setting an appropriate recording mode is important as it determines the picture quality and recording time to the HDD or a recordable DVD, see page 38.

49