Philips DVDR3360H user manual TV Shape, Letterbox, PanScan, 169, Black Level, Normal, Enhanced

English

System Menu Options (continued)

Video Output settings (underlined options are the factory default settings)

TV Shape	The picture shape can be adjusted to fit your TV.
	{ 4:3 Letterbox } –		For a ‘wide-screen’ display with black bars on the
			top and bottom.
	{ 4:3 PanScan }	–	For a full-height picture with the sides trimmed.
	{ 16:9 }	–	For wide-screen TV (frame ratio 16:9).
Black Level	Adapts the colour dynamic for NTSC disc.
	{ Normal }	–	Normal colour contrast.
	{ Enhanced }	–	Improve the colour contrast and brightens the
			picture of an NTSC-compatible DVD.

Horizontal

Video Output

Progressive

HDMI

Video upscalling

HDMI output

Use keys to adjust the horizontal position of the picture on your TV screen, press OK to confirm the setting.

Chooses the type of video output that matches the video connection between this recorder and your TV.

{RGB•CVBS } – For RGB or CVBS connection.

{S-Video} – For S-Video connection.

Before enabling the progressive scan feature, you must ensure that your TV can accept progressive signals (a progressive scan TV is required) and you have connected the recorder to your TV using the Y Pb Pr (see page 19).

{ On }	–	Turn on progressive scan mode.
{ Off }	–	Disable the progressive scan mode.

Note: The progressive video output will be disabled if the HDMI output is turned on.

Video settings for HDMI connection only

This feature is only applicable for HDMI connection (see page 19).

{ Auto }	– Turn on the HDMI output. The video output
	resolution will automatically follow the video signal
	received.
{ On }	– Turn on the HDMI output. The video output
	resolution will follow the setting at { Video upscalling }.

Set the video resolution depending on the capability of the connected TV/device (480p, 576p, 720p, 1080i).

‘i’ denotes interlace and ‘p’ denotes progressive.

Note: This setting is not available if the HDMI setting is set to { Auto }.

Changing the video upscalling will normally cause the TV to blank out for a few seconds as it adjusts to the new setting. Resolutions not supported by the television will be greyed out.

This setting determines the video output colour format.

{ RGB } – Give brighter colours and a deeper black.

{YPbPr } – Provide a very fine shade of colour. This is the standard setting for HDMI compatible devices.

84