Philips DVDR3360H user manual Digital Channel settings, Channel at the current position

System Menu Options (continued)

Digital Channel settings

English

Digital Ch.

Setup

Video fav.

Radio fav.

Sort video

Sort radio

Digital Ch.

Setup

Digital install

Update install

Full install

Check signal

Although this recorder selects all the available digital TV channels during basic installation, you may want to repeat the process later if more channels become available in your area or if you are reinstalling the recorder. It also allows you to adapt the digital TV and radio channels to your personal preference.

APress SYSTEM on the remote control. Select { Setup } in the menu and press NEXTÉ repeatedly to select { Digital Ch. }.

B Press repeatedly to select the following settings in the menu and press NEXTÉ to enter its options.

Video/ Radio Fav.

Sort Video/ Radio

Updt Install

Full Install

Check Signal

CHECK DIGITAL SIGNAL QUALITY

Check the antenna connections and position. Position the antenna to reach best signal quality.

Frequency 222.22

Go back

Signal strength Low High

Signal quality Low High

Press OK to mark your favourite digital TV/radio channels for quick access by using the channel up/down button on the remote control.

– The TV/radio channels can be accessed by using the CH + − on the remote control.

– The TV/radio channels can only be accessed by pressing the corresponding number button on the remote control.

According to your preference, you can change the order of the stored TV channels.

001	ARD	004	TELET		004	CHAN
002	TELET	005	CHAN		005	RTL4
003	ORF2 ---ORF2	006	RTL4	ORF2	006	ORF2
004	TELET	007	SBS6		007	SBS6

1)	Use	keys to select the TV/radio channel that you want to move
	and press OK to confirm.
2)	Use	keys to shift the TV/radio channel to the desired position
	and press OK to swap the TV/radio channel with the TV/radio
	channel at the current position.

Note: During sorting, the alphanumeric keypad 0-9 on the remote control can be used to select a preset number.

This adds only the new channels to your existing preset list, after the last free preset position. New channels refer to the channels that are currently not installed. Press OK to start new channels search and install.

Press OK to start digital channels search and install. It will replace all previously stored digital TV/radio channels.

Press OK to display signal strength and quality information of the digital tuner. It will help to find the best position of antenna.

Use keys to change the frequency or channel number and press OK to check the signal quality. Position the antenna at the area where the maximum signal quality is reached.

83