Philips DVDR3360H Record mode, Language, Auto protect, Chapters, Off, Standard, Smart, SAT record

English

Before Recording (continued)

Recordings (underlined options are the factory default settings)

Record mode	The recording mode defines the picture quality of recordings and the
	maximum recording time on the HDD (hard disk drive), see page 37 on
	‘Recording Mode Setting Chart’.
	Important! When copying from HDD to a recordable DVD, the
	recording mode of the selected recording in the HDD will automatically
	be transferred. Selecting another recording mode is not possible.
	The factory default setting is SP.
	Selects the recording language to be used for TV programmes (analogue
Language
	TV channels only) which are transmitted an additional audio language. For
	example, if a programme is available in English and Spanish, with Spanish
	being the additional language option.
	{ Lang I }	–	Original broadcast language.
	{ Lang II }	–	Additional audio language.
	Note: To make an immediate recording with the optional audio
	language, press SYSTEM on the remote control and access the
	{ Toolbar - Options }, then select the language in the { AUDIO } option.
	With this feature turned on, the new recording titles will be automatically
Auto protect
	protected.
	{ On }	–	Delete and edits on the recorded titles are not possible.
	{ Off }	–	Turn off the function.
Chapters	Automatically divides a recording (title) into chapters by inserting chapter
	markers at a specific interval. This enables you to access a specific point in
	the recording quickly.
	{ Off }	–	No chapter marker is inserted in the recording.
	{ Standard }	–	Chapter markers are inserted automatically during
	{ Smart }		recording at approximately 5 (five) minutes interval.
		–	This setting is only available for the DV camcorder
			recording. A chapter marker is inserted whenever
			there is a break in the recording, for example, when
			the recording is stopped or paused and restarted again.
SAT record	This feature is only available if you have connected a Satellite Receiver or
	other devices to the EXT 2 AUX-I/O scart socket of this recorder, see
	page 41 for more information.
	{ Off }	–	Turn off the function.
	{ EXT2 }	–	Enable this recorder to start and stop recording when
			a signal is received from the connected device.
Direct rec.	With this feature, you can immediately record the programme that you
	are viewing on the TV by pressing REC button without needing to turn on
	this recorder, see page 41 for more information.
	{ On }	–	Enable recording directly from the TV display.
	{ Off }	–	Turn off the function.
	This setting is only required if you are using the recorder’s COAXIAL IN
5.1 Recording
	socket to connect to the coaxial output on your Cable Box or Satellite
	Receiver.
	{ On }	–	Enable 5.1-channel recording from the cable box or
	{ Off }		satellite receiver you have connected.
		–	Disable the digital audio input.

38