Philips PFL43X7K/12, PFL43X7T/12 user manual Use EasyLink, Sleeptimer, Child lock, Parental rating

Sleeptimer

You can switch the TV to standby after a specified time. During the countdown to the specified time, you can switch off your TV earlier or reset the sleeptimer.

1.Press .

2.Select [Setup] > [TV settings] >

[Preferences] > [Sleeptimer].

3.Press the Navigation buttons to set the sleeptimer.

The sleeptimer can be set up to 180 minutes, in steps of ten minutes. To switch off the sleeptimer, set it to zero minutes.

4.Press OK to activate the sleep timer. After the specified time, the TV switches to standby.

Child lock

To protect children from unsuitable TV programmes, you can lock the TV or block age-rated programmes.

Set or change the child lock code

1.Press .

2.Select [Setup] > [Channel settings] or

[Satellite settings] > [Child lock].

3.Select [Set code] or [Change code].

4.Enter the code with the Numeric buttons.

Tip: If you forget your code, enter '8888' to override any existing codes.

Lock or unlock channels

1.In the child lock menu, select [Channel lock].

2.Enter the child lock code with the Numeric buttons. The [Channel lock] menu appears.

3.Select channels to lock or unlock.

Parental rating

You can set your TV to display only programmes with age ratings lower than your child's age. This restriction only applies to digital channels from broadcasters that rate their programmes according to age.

EN 30

1.Press .

2.Select [Setup] > [Channel settings] or

[Satellite settings].

3.Select [Child lock] > [Parental rating]. A message prompts you to enter the child lock code.

4.Enter the child lock code with the Numeric buttons.

5.Select an age rating, then press OK.

All programmes above the selected age rating are blocked.

For information on child lock codes, see Use more of your TV > Set locks and timers > Child lock (Page 30).

Use EasyLink

What you can do

You can get the most out of your HDMI- CEC-compliant devices with Philips EasyLink enhanced control features. Connect your HDMI-CEC compliant devices through HDMI to your TV and control them at the same time with your TV remote control.

Note: Other brands describe HDMI-CEC functionality differently. Some examples are Anynet (Samsung), Aquos Link (Sharp) or BRAVIA Sync (Sony). Not all brands are fully compatible with Philips EasyLink.

After you have switched on Philips EasyLink, the following features are available:

One-touch play

When you play an HDMI-CEC compliant device, the TV switches on from standby and switches to the correct source.

One-touch standby

When you press on the TV remote control, the TV and all HDMI-CEC compliant devices switch to standby mode.

EasyLink remote control

You can control multiple HDMI-CEC compliant devices with your TV remote control.