To stop recording at any time, press 
.
Note:
∙While recording, you cannot switch TV channels.
∙While recording, you cannot pause the TV broadcast.
Schedule a TV programme recording
You can schedule a recording of an upcoming programme that will be broadcast today or in up to eight days' time.
1.Press 
and select [Programme guide].
2.Select the channel and programme to record.
∙To scroll through programmes, use the Navigation buttons.
∙To select a channel, enter the channel number.
∙To change the date, select the date at the top of the page, then press OK.
Select a date from the pop-up window, then press OK.
3.Select the programme, press 
OPTIONS, then select [Record].
4.To record beyond the time when the programme is scheduled to end, change the recording time.
5.Select [Schedule] then press OK. The programme is scheduled for recording. If you schedule overlapping recordings, a warning is displayed.
If you schedule recordings while you are away, make sure that you leave the TV in standby and keep the USB hard drive switched on.
Schedule a timed recording
To schedule a timed recording that is not linked to any programme:
1.Press 
, then select [Programme guide].
2.Press 
OPTIONS, select [Manual record], then press OK.
3.Select the channel, date and time span in the dialogue box.
4.Select [Schedule], then press OK.
EN 26
Programme information
To view more information about a programme, select the programme from the programme guide and press OK. Depending
on the status of this programme, you can start watching it, schedule its recording, play back the recording, or delete the recording from this page.
Watch recordings
After you've recorded a TV programme, you can watch it.
1.Press 
, select [Programme guide] > [{0} Recordings], then press OK.
A list of recordings is displayed.
2.Select a recording from the list, then press OK.
The recording starts to play.
Note: In [{0} Recordings], the number in
brackets changes according to the number of complete recordings available. If you see [TV Recording] instead, no recordings are
complete.
You can control play with the Play buttons on the remote control:
∙To play or pause, press 
or 
.
∙To search forward or backwards, press 
or 
.
∙To stop, press 
.
Note:
∙If a broadcaster limits the number of days that a recording can be viewed after the programme has been broadcast, the list of recordings shows the number of days before the recording expires.
∙If a recording has expired or if a broadcaster restricts playback, the recording cannot be played.