Philips PFL43X7H/12, PFL43X7K/12, PFL43X7T/12 Satellite settings, Install satellite channels

Page 38

4.Connect the USB storage device.

5.Press .

6.Select [Setup] > [TV settings] >

[Preferences] > [Channel list copy] > [Copy to TV], then press OK.

The channel list is copied to the TV storage device.

7. Disconnect the USB storage device.

Step 3: If the second TV has no channels installed

1.Switch on the second TV (on which you want to copy the channel list).

2.Press .

3.Select [Setup] > [Search for channels] > [Reinstall channels], then press OK.

The country menu is displayed.

4.Make sure that the country setting is the same as for the first TV.

5.Press .

6.Press [Cancel] to exit.

7.If the country setting is different, reinstall

the second TV to match the country setting of the first TV. See Set up your TV > Restore default settings (Page 42).

8.Connect the USB storage device to the second TV.

9.Press .

10.Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > [Copy to TV], then press OK.

The channel list is copied to the second TV.

11.Disconnect the USB storage device.

Satellite settings

What you can do

View satellite channels

Note: Available on certain models only. [Search for satellite] is only available if the TV supports DVB-S.

To receive satellite channels, connect the SAT connector on your TV to a satellite dish antenna.

EN 38

LNBs

This TV can receive signals from 4 different low noise block-down converters (LNBs). An LNB is mounted at the end pole of the dish antenna and captures signals from a satellite.

Install satellite channels

1.While you watch TV, press .

2.Select [Setup] > [Search for satellite] >

[Reinstall channels].

3.Follow the onscreen instructions to complete the installation.

4.Once complete, select [Finish], then press OK.

Select connection type

While you install satellite channels, you need to set the connection type. The connection type determines the number of LNBs on your dish antenna and the number of satellite channels you can install.

1.After you select [Reinstall channels], select [Settings] and then press OK.

2.Select [Connection type].

3.Select a setting, then press OK.

∙[One LNB]: Select if you have only one LNB.

∙[DiSeqC Mini (2 LNBs)]: Select if you have 2 LNBs.

∙[DiSeqC 1.0 (3-4 LNBs)]: Select for 3 or 4 LNBs.

Test signal strength

If a channel or transponder is skipped during installation, you can test the signal strength of a satellite or add a new channel.

1.While you watch TV, press .

2.Select [Setup] > [Search for satellite] >

[Manual installation], then press OK.

3.Select the LNB.

4.If you know the frequency of the

transponder (which can include several channels), select [Frequency] and enter it.

5.Select [Search], then press OK.

6.If a new frequency is found, press [Store]to add the new transponder with its channels.

Page 37 Page 39
Image 38
Page 37 Page 39
Contents PFL43x7H/12 PFL43x7K/12 PFL43x7T/12 Contents Smart TV TV tourHigh Definition TV Media playbackTV controls Ensure that your TV and smartphone are EasyLink controlsSmartphone control Your TV Network and the InternetRisk of electric shock or fire SafetyImportant information 3D, health warning Screen careCE compliance Pixel characteristicsLock the TV Trademarks and copyrights Compliance with EMFEnd of use SustainabilityEnergy efficiency PlayReady Final ProductsHelp and support Switch the TV on Switch TV on or offAdjust TV volume Watch TVManage channel lists Switch TV channelsManage favourites Listen to digital radio Use smart settingsSelect a source Change picture format Following settingsView programme guide From broadcasterWatch 3D Watch content∙ Subtitles Enable or disable subtitles when available What you needWhat you can do Switch off 3DView media Play files from computer∙ Stop Stop playback ∙ Repeat Repeat a video Play files from USBPlay options ∙ Show info Display the file information Listen to musicBrowse Smart TV Can register at any time Connect the TV to the InternetRent online videos Access Smart TV Applications AppsSmart TV options Video on to the video memory. While Remote controlDownload the video That the video is ready to playAccess interactive TV Interactive TV∙ You can pause a programme for a maximum of 90 minutes Install USB hard drivePause TV Make sure that it is connected to itsPause a live TV broadcast Devices to the TV Start recordingPreferences Programme guide From network Select Schedule, then press OK to confirm the end timeWatch recordings Select a date from the pop-up window, then press OKManage recordings Game settingPlay games Add a game consoleText options View TextSelect a Text languageDigital text Set locks and timersSearch TextChild lock SleeptimerUse EasyLink Parental ratingSystem audio control Listen to another device when TV is in standbyControl devices simultaneously Synchronise audioSynchronise audio Press Select Setup TV settings EasyLink TV speakersSelect speaker output DeviceView Scenea ∙ Reset Reset to default factory settings Settings assistantMore picture settings Picture and sound Reset picture and sound Channel settings More sound settings Automatic installFine-tune analogue channels Install analogue channelsInstall digital channels Copy channels Update channel listCheck the country setting Skip the search for channelsSatellite settings Install satellite channelsMenu language Language settingsAdd and remove satellites Audio languageVisually impaired access Universal access settingsHearing impaired access Subtitles on digital channelsTV demo Other settingsPlacement LocationUpdate with USB Update softwareRestore default settings Update from digital broadcastPb Pr About cablesCable quality Connect the disc player to the TV with an Hdmi cable Connect devicesBlu-ray or DVD disc player TV receiver Video recorder Game console Connect the game console to the TV with an Hdmi cableHome theatre Connect the digital camera to the TV with a USB cable Digital cameraDigital camcorder Connect the digital camcorder to the TV with an Hdmi cableComputer Connect more devicesUSB hard drive Connect the USB hard drive to the TV with a USB cableKeyboard and mouse Connect the keyboard and mouse to the TV with a USB cable Watch a connected deviceAdd new device Remove device Network and the InternetRename device This section is only for Wi-Fi ready TVs Wired connectionWi-Fi ready ConnectScan for routers If your router has WPA WiFi ProtectedTV network name Push the CAM in as far as it will go Watch CAM servicesCommon interface General issues Channel issuesThere is a picture but sound quality is poor Picture issuesSound issues Connection issues Network issuesWireless network is distorted or not found Contact PhilipsDisplay and sound Power and receptionDisplay resolutions Multimedia Supported multimedia connectionsConnectivity For 42 and 47 inch models 15-18 mm Supported TV mountsHelp version UMv 313913705423Audio sync CAM, see Conditional Access Module 56 channel listAge rating Page Sound settings, reset 35 standby VGA Visually impaired 40 volume YouTube YPbPr, component videoDocument order number
Top Page Image Contents