Switch TV channels
∙Press CH +/- on the remote control or TV.
∙Press the Numeric buttons to enter a channel number.
Manage favourites
You can view all channels or only a list of your favourite channels so that you can find them easily.
Press 
LIST to access the channel list.
Create a list of your favourite channels
1.Press 
LIST.
2.Select the channel to mark as a favourite, then press 
OPTIONS.
3.Select [Mark as favourite], then press OK. The selected channel is marked with a star.
To remove a channel from the favourites list, select [Unmark as favourite], then press
OK.
Select a channel list
1.Press 
LIST, then press 
OPTIONS.
2.Select [Select list] > [Favourites] to display channels in the favourite list or [All] to display all channels.
3.Press OK to confirm.
Manage channel lists |
| ||
After the channels have been installed, you | English | ||
can manage them: | |||
| |||
∙ | Rename channels |
| |
∙ | Reorder channels |
| |
∙ Listen to digital radio
Rename channels
You can rename the channels. The name
appears when the channels are selected. 1. While you watch TV, press 
LIST.
The channel list is displayed.
2.Select the channel to rename, then press
OPTIONS.
3.Select [Rename], then press OK.
4.Press the Navigation buttons to select each character, then press OK.
Tips:
∙You can press OK in the entry screen to enable the Onscreen Keyboard.
∙Press [ABC] or [abc] to switch between uppercase and lowercase letters.
5.Once complete, select [Done], then press OK to confirm.
6. Press 
to exit.
Reorder channels
After the channels have been installed, you can reorder the channel list.
1. While you watch TV, press 
LIST. The channel list is displayed.
2.Select the channel to reorder, then press
OPTIONS.
3.Select [Reorder], then press OK.
4.Press the Navigation buttons to move the
highlighted channel to another location, then press OK.
5.Select one of the following options, then press OK.
∙ [Insert]: Insert the channel into the
desired location.
∙ [Swap]: Swap location with another channel.
6. Once complete, press 
OPTIONS, then select [Exit].
EN 13