Philips PFL43X7K/12 user manual Watch TV, Switch TV on or off, Adjust TV volume, Switch the TV on

Page 12

2 Use your TV

Watch TV

Switch TV on or off

Switch the TV on

∙Connect the TV to the mains outlet and press the mains power switch.

∙If the TV is on standby, press on the remote control or on the rear panel of the TV.

Note: There is a short delay before the TV

responds.

Tip: If you cannot find your remote control and want to switch the TV on from standby, press any key on the rear panel of the TV.

Switch TV to standby

Press on the remote control or on the rear panel of the TV.

The remote control sensor on the TV switches to red.

Switch off the TV

Turn off the mains power switch. The TV switches off.

Note: Though your TV consumes very little energy when it is in standby or switched off, it does use some energy. If you are not going to use the TV for an extended period of time, disconnect the TV from the mains plug.

EN 12

Automatic switch off

You can save energy with this TV's energy efficiency settings. The settings are enabled by default, so that if there is no user interaction (such as pressing a remote control button or a control on the rear panel) for four hours, the TV will automatically switch to standby.

To disable automatic switch off

1.While you watch TV, press the Green button on the remote control.

2.Select [Auto switch off], then press OK. A confirmation message is displayed.

Adjust TV volume

Increase or decrease the TV volume

∙Press +/- on the remote control.

∙Press +/- on the side of the TV.

Mute or unmute the TV volume

∙Press to mute the TV.

∙Press again to restore the volume.

Adjust headphone volume

1.Press > [Setup] > [TV settings] > [Sound].

2.Select [Headphones volume], then press OK.

3.Press the Navigation buttons to adjust the volume.

Image 12

Contents PFL43x7H/12 PFL43x7K/12 PFL43x7T/12 Contents TV tour High Definition TVSmart TV Media playbackTV controls EasyLink controls Smartphone controlEnsure that your TV and smartphone are Your TV Network and the InternetSafety Important informationRisk of electric shock or fire 3D, health warning Screen carePixel characteristics Lock the TVCE compliance Trademarks and copyrights Compliance with EMFSustainability Energy efficiencyEnd of use PlayReady Final ProductsHelp and support Switch TV on or off Adjust TV volumeSwitch the TV on Watch TVSwitch TV channels Manage favouritesManage channel lists Use smart settings Select a sourceListen to digital radio Following settings View programme guideChange picture format From broadcasterWatch content ∙ Subtitles Enable or disable subtitles when availableWatch 3D What you needSwitch off 3D View mediaWhat you can do Play files from computerPlay files from USB Play options∙ Stop Stop playback ∙ Repeat Repeat a video ∙ Show info Display the file information Listen to musicBrowse Smart TV Can register at any time Connect the TV to the InternetAccess Smart TV Applications Apps Smart TV optionsRent online videos Remote control Download the videoVideo on to the video memory. While That the video is ready to playAccess interactive TV Interactive TVInstall USB hard drive Pause TV∙ You can pause a programme for a maximum of 90 minutes Make sure that it is connected to itsPause a live TV broadcast Start recording Preferences Programme guide From networkDevices to the TV Select Schedule, then press OK to confirm the end timeWatch recordings Select a date from the pop-up window, then press OKGame setting Play gamesManage recordings Add a game consoleView Text Select aText options Text languageSet locks and timers SearchDigital text TextSleeptimer Use EasyLinkChild lock Parental ratingListen to another device when TV is in standby Control devices simultaneouslySystem audio control Synchronise audioPress Select Setup TV settings EasyLink TV speakers Select speaker outputSynchronise audio DeviceView Scenea Settings assistant More picture settings∙ Reset Reset to default factory settings Picture and soundChannel settings More sound settingsReset picture and sound Automatic installInstall analogue channels Install digital channelsFine-tune analogue channels Update channel list Check the country settingCopy channels Skip the search for channelsSatellite settings Install satellite channelsLanguage settings Add and remove satellitesMenu language Audio languageUniversal access settings Hearing impaired accessVisually impaired access Subtitles on digital channelsOther settings PlacementTV demo LocationUpdate software Restore default settingsUpdate with USB Update from digital broadcastAbout cables Cable qualityPb Pr Connect devices Blu-ray or DVD disc playerConnect the disc player to the TV with an Hdmi cable TV receiver Video recorder Game console Connect the game console to the TV with an Hdmi cableHome theatre Digital camera Digital camcorderConnect the digital camera to the TV with a USB cable Connect the digital camcorder to the TV with an Hdmi cableConnect more devices USB hard driveComputer Connect the USB hard drive to the TV with a USB cableKeyboard and mouse Watch a connected device Add new deviceConnect the keyboard and mouse to the TV with a USB cable Network and the Internet Rename deviceRemove device Wired connection Wi-Fi readyThis section is only for Wi-Fi ready TVs ConnectIf your router has WPA WiFi Protected TV network nameScan for routers Watch CAM services Common interfacePush the CAM in as far as it will go General issues Channel issuesPicture issues Sound issuesThere is a picture but sound quality is poor Connection issues Network issuesWireless network is distorted or not found Contact PhilipsPower and reception Display resolutionsDisplay and sound Multimedia Supported multimedia connectionsConnectivity Supported TV mounts Help versionFor 42 and 47 inch models 15-18 mm UMv 313913705423CAM, see Conditional Access Module 56 channel list Age ratingAudio sync Page Sound settings, reset 35 standby VGA Visually impaired 40 volume YouTube YPbPr, component videoDocument order number