dbx Pro 260 user manual System Setup, Stereo

Section 1 Getting Started DriveRack ™

System Setup

•The arrow will indicate the selected Wizard setup. To select any one of the three options, rotate the <DATA> wheel. If you are performing the System setup, press either the <NEXT PG> button or the <DATA> wheel and the display will appear as follows:

Input Setup

Select Input as MONO or STEREO.

>STEREO

•Simply rotate the <DATA> wheel to select either a Mono or Stereo input configuration. Once you have selected your input option, press the <NEXT PG> button and the display will appear as follows:

EQ Setup

Select EQ as GEQ or PEQ

>PEQ

•Simply rotate the <DATA> wheel to select either a Graphic or Parametric EQ. Once you have selected your EQ option, press the <NEXT PG> button and the display will appear as follows:

Insert 1 Setup Select Insert 1 effect.

>Compressor

•Rotate the <Data> wheel to select any one of the numerous Insert modules available. Once you have selected your Insert 1 module option, press the <NEXT PG> button and the dis- play will appear as follows:

Insert 2 Setup Select Insert 2 effect.

>AFS

•Rotate the <Data> wheel to select any one of the numerous Insert modules available. Once you have selected your Insert 1 module option, press the <NEXT PG> button and the dis- play will appear as follows:

Main Speaker

Select Main PA

JBL SRX

>SR4702X Passive

•Rotate the <Data> wheel to select any one of the numerous custom-tuned MAIN speaker options available. If the speaker being used is not specified in the menu, select CUSTOM. Once you have selected your Main speaker option, press the <NEXT PG> button and the display will appear as follows:

®

6