dbx Pro 260 user manual Navigating the EQ -GEQ and PEQ, Navigating the Xover Section

DriveRack™ Editing Functions Section 2

STORE(Delete) - The store button is used to store program edits.When pressed and held, the 260 will enter the PROGRAM DELETE module.

RTA (Wizard) - This enters the RTA mode, or when held, enters the 260

DriveRack Wizard setup menu which includes: System Setup, Auto EQ setup and

AFS Wizard.

2.3 Navigating the EQ Section (28-GEQ and PEQ)

To edit the parameters of the EQs used in a selected program, simply use the following procedure. From program mode, press the EQ button to reach the EQ module to be edited. Successive presses of the EQ button will move through each channel.

Navigate through the Pages of the selected EQ section by depressing "Next Page" or "Prev Page" successively until arriving at the desired Page.

EQ

The EQ button toggles through the EQs used in

GEQ

or

GEQ On/Off	Freq- 31.5Hz-18kHz
Flatten/Restore	Gain -12dB to12dB

GEQ/PEQ

each channel of the selected program menu.

EQ

PEQ

PEQ On/Off	B1 Freq- 20Hz-20kHz
Flatten/Restore	Gain -12dB to12dB
Bell,HSelf, LShelf, LHShelf,	Q .20 to 16.0

B2 Freq- 20Hz-20kHz	B2 Freq- 20Hz-20kHz	...
Gain -12dB to12dB	Gain -12dB to12dB
Q .20 to 16.0	Q .20 to 16.0

Successive presses of the Data wheel will select effect parameters within the currently selected page.

2.4 Navigating the XOVER Section

To edit the parameters of the Crossover used in a selected program, simply use the following procedure. From program mode, press the X-OVER button. Once you have reached the Crossover module, Navigate through the Pages of the selected Crossover module by pressing the "Next Page" or "Prev Page" buttons successively until arriving at the desired Page.

XOVER

The XOVER button	XOVER
toggles through
the XOVER used in
each channel of
the selected
program
menu.

Low Pass

Freq- 19.7kHz to Out Slope - BS, BW, LR (6,12,18,24,36,48)

High Pass

Freq- 20.kHz to Out Slope - BS, BW, LR (6,12,18,24,36,48)

Gain- -20 to 20dB

Repeat, for each crossover band

Successive presses of the Data wheel will select effect parameters within the currently selected page.

®

DriveRack™ User Manual 15