Philips VRKD12BL, VRKD11YL warranty Hookups With a Stereo TV

Page 10

10 Hookups With a Stereo TV

			antenna or
			1 ANT(enna)cable to
		ANT	IN Jack
		IN
AUDIO
OUT	IN	OUT
		OUT
VIDEO		CH3 CH4
VIDEO
VIDEO (yellow) and		2
AUDIO (white) OUT Jacks		2	Video Cable
AUDIO (white) OUT Jacks

3 Audio Cable

●Audio and Video cables are not supplied.

1

Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.

2

Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.

3

Connect an audio cable to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV.

(If your TV has Right and Left AUDIO IN Jacks, you must use a “Y” splitter audio cable as illustrated to deliver audio to the TV’s right and left channels.)

4

Turn on your TV, making sure it is in Line Input (or Auxiliary In or Video In) mode. Please refer to your TV instruction book for details.

Audio and Video

IN Jacks on TV

Helpful Hint

•This hookup will not give you stereo sound. To get stereo sound, use the connections on page seven and select the channel to be viewed at the TV (with the VCR turned off).

Image 10

Contents Instruction Book This bolt of lightning indi- cates uninsulated material Dear Philips product ownerFor Customer Use Model No Serial NoIntroduction FeaturesSafety Precautions Declaration of ConformityTable of Contents VCR maintenance Putting Batteries in the Remote ControlUsing the Remote Control Holder Erasure PreventionUsing the Alarm Clock Holder Using the Alarm ClockPutting Batteries in the Alarm Clock Setting the Time and the AlarmHookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVConnections Cable SignalRecording/Viewing Any Channel Cable Box/DBS SignalRecording One Channel/Watching Another CableHookups With a Stereo TV Turning on Your VCR Automatic TV Channel Setup Press the Menu button until the main menu appearsAutomatic TV Channel Setup cont’d Adding/Deleting ChannelsSetting the VCR Clock Setting the VCR Clock cont’d Your selection will flash on the screen in the AM/PM spacePress the EXIT/C. Reset button when you are finished Choosing a LanguagePress the Display button once Clock mode OFF mode Press the Display button once Count modeOn-Screen Displays Power Button Remote Control ButtonsRecord Button Remote Control Buttons cont’d Timer Light Alarm ClockPower Light VCR/TV LightFront Panel Audio OUT Jack AC Power CordBack Panel Video OUT JackVHS Quasi Play Back Sqpb PlayingRead and follow the steps below to play a tape Recording 1Turn on the TV Insert a tapeStarting an OTR Stopping an OTRTimer Recording Details are on page fiveRepeat the procedure in to set the recording’s end time Enter the recording’s start timeTimer Recording cont’d Cancelling a Timer Recording Main menu will appearCorrecting a Timer Recording VCR/TV light will disappear To stop recording, press the Stop buttonRerecording Copying Tapes AntennaPress the Play button or the Stop button repeatedly to Repeat PlaySelect Auto Repeat Forward and Reverse Searching SP/LP/SLP Forward and Reverse Searching/Pausing a PicturePausing a Picture Super High Speed Searching LP/SLPPicture Select Real-Time Counter Memory Press the Play button to watch the tapeAutomatic Playback Features Helpful Hints Helpful Hints cont’d Renewed Specifications Dictionary/SpecificationsDictionary Index Supplied Accessories