Philips VRKD12BL, VRKD11YL warranty Using the Alarm Clock, Putting Batteries in the Alarm Clock

6 Using the Alarm Clock

Putting Batteries in the Alarm Clock

1

Remove the battery compartment lid on the back of the alarm clock. Use your finger or fingernail to flip down the lid.

2

Insert one AA battery inside the battery compartment with its + and – ends placed as shown in the picture at right.

3

Replace the battery compartment lid.

Using the Alarm Clock Holder

1

Pop the three slots of the alarm clock holder into the three holes on the left side of the front of the VCR. The holder will curve down, like a bowl, when placed correctly.

2

A velcro strip is supplied. Peel off the tape backing, then stick one piece of the velcro to the front of the VCR and one piece to the top of the clock as shown in the picture at right. Make sure the velcro pieces will touch when the alarm clock is in place in the holder.

3

Set the alarm clock in the clock holder.

1 2 3

Velcro on

front of VCR

Velcro on

back of clock

POWER

Alarm clock

holder

Alarm clock placed

POWERcorrectly on alarm clock holder

Setting the Time and the Alarm

1

Turn the right knob to set the current time.

2

Turn the left knob to set the time for the alarm.

3

Set the OFF/ON switch to ON. At the proper time, the alarm will sound. The alarm will sound until you move the OFF/ON switch to OFF.

•Set the VCR’s internal clock for a timer recording or One- Touch Recording. Details are on pages 14-15.

•When you do not use the alarm, set the OFF/ON switch on the back of the alarm clock to OFF.

•The alarm will sound in the next 12-hour period. The alarm clock does not have AM or PM settings.

•The alarm sound is a beep. The bells on the top of the clock are for appearance only. The bells will not ring.

OFF/ON
Switch
Alarm Knob	Time Knob
(on the left	(on the right
as you look	as you look
at the back	at the back
of the clock)	of the clock)