●Channels are set up. Details are on page 12.
●The desired recording speed (SP, SLP) has been selected with the SPEED button. Details are on page 42.
●There is a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s). Details are on page five.
●The VCR is in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.)
Starting an OTR
1
Use the CHANNEL o/p button to select the channel you want to record.
2
Press the RECORD button on the VCR repeatedly until the desired recording length (30 minutes to eight hours) appears in the upper left corner of the TV screen.
Recording will begin immediately.
●The RECORD button on the remote control cannot be used for
OTR (0:30)
One-Touch Recording 25
POWER
| CHANNEL | 1 |
PAUSE |
| |
| PLAY |
|
| STOP |
|
F. FWD
REW
2
PLAY
PAUSE
STOP/EJECT
RECORD REW F.FWD
Stopping an OTR
To stop an OTR before recording is finished, press the STOP but- ton on the remote control. To cancel the OTR but continue recording, press the RECORD button on the VCR repeatedly until REC appears in the upper left corner of the screen.
Helpful Hints
•To change the recording length while an OTR is in progress, press the RECORD button on the VCR repeatedly until the desired length appears on the TV screen.
•You can not pause recording during an OTR.
•If the preset time for a timer record- ing comes up during an OTR, the OTR has priority. The timer recording will not occur.
•To show the time remaining for an OTR, press the DISPLAY button repeatedly until OTR and the time remaining appear in the upper left corner of the screen.
•If the end of the tape is reached dur- ing an OTR, the VCR will stop record- ing, eject the tape, and turn itself off.