Philips VRKD11YL, VRKD12BL VCR/TV light will disappear, To stop recording, press the Stop button

Page 31

Recording One Channel/Watching Another 31

1

Press the RECORD button to start a recording of the cur- rent channel. Details are on page 24.

2

Press the VCR/TV button to put the VCR in TV position.

3 Select the channel you want to watch at the TV.

4 Set the TV to channel 3 or 4.

POWER

The VCR/TV light will disappear.

3

CHANNEL

PAUSE

PLAY

Use the TV remote control to select the channel you want to watch at the TV.

4

To return to the channel being recorded, use the TV remote control to select channel 3 or 4, whichever chan- nel the CH3/CH4 switch on the back of the VCR is set to.

5

Press the VCR/TV button on the VCR remote control to put the VCR in VCR position. The VCR/TV light will appear. The channel being recorded will appear on the screen.

6

1

STOP

F.FWD

REW

RECORD VCR/TV

SPEED MENU DISPLAY

EXIT/ C. RESET COUNTER MEMORY

2

5

6

To stop recording, press the STOP button.

Helpful Hint

• If you use a Cable Box/DBS, you may not be able to watch one chan- nel while recording another. Details are on pages eight-nine.

Image 31

Contents Instruction Book Model No Serial No Dear Philips product ownerFor Customer Use This bolt of lightning indi- cates uninsulated materialDeclaration of Conformity FeaturesSafety Precautions IntroductionTable of Contents Erasure Prevention Putting Batteries in the Remote ControlUsing the Remote Control Holder VCR maintenanceSetting the Time and the Alarm Using the Alarm ClockPutting Batteries in the Alarm Clock Using the Alarm Clock HolderDisconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemConnections Cable SignalRecording/Viewing Any Channel Cable SignalRecording One Channel/Watching Another Cable Box/DBSHookups With a Stereo TV Turning on Your VCR Press the Menu button until the main menu appears Automatic TV Channel SetupAdding/Deleting Channels Automatic TV Channel Setup cont’dSetting the VCR Clock Your selection will flash on the screen in the AM/PM space Setting the VCR Clock cont’dChoosing a Language Press the EXIT/C. Reset button when you are finishedPress the Display button once Clock mode OFF mode Press the Display button once Count modeOn-Screen Displays Power Button Remote Control ButtonsRecord Button Remote Control Buttons cont’d VCR/TV Light Alarm ClockPower Light Timer LightFront Panel Video OUT Jack AC Power CordBack Panel Audio OUT JackVHS Quasi Play Back Sqpb PlayingRead and follow the steps below to play a tape 1Turn on the TV Insert a tape RecordingStopping an OTR Starting an OTRDetails are on page five Timer RecordingEnter the recording’s start time Repeat the procedure in to set the recording’s end timeTimer Recording cont’d Main menu will appear Cancelling a Timer RecordingCorrecting a Timer Recording To stop recording, press the Stop button VCR/TV light will disappearAntenna Rerecording Copying TapesPress the Play button or the Stop button repeatedly to Repeat PlaySelect Auto Repeat Super High Speed Searching LP/SLP Forward and Reverse Searching/Pausing a PicturePausing a Picture Forward and Reverse Searching SP/LP/SLPPicture Select Press the Play button to watch the tape Real-Time Counter MemoryAutomatic Playback Features Helpful Hints Helpful Hints cont’d Renewed Specifications Dictionary/SpecificationsDictionary Index Supplied Accessories