Philips VRKD11YL Recording One Channel/Watching Another, Cable Box/DBS, Signal, TV’s Antenna

Page 9

Hookups With a Cable Box/Direct Broadcast System (cont’d) 9

With this connection:

●You may watch one channel while recording another.

●You may not record scrambled channels.

1 VCR			2 Cable Box/DBS
		ANT	2 Cable Box/DBS
		IN
			IN
OUT	IN	OUT	OUT
VIDEO		CH3 CH4
VIDEO
Cable			RF coaxial
Cable			cable
Signal			cable
Signal

75V
ANT	/
CABLE

	RF coaxial	3	TV’s ANTENNA
			IN Jack
	cable

Connections

1

Connect a Cable signal to the VCR’s ANT(enna) IN Jack.

2

Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DBS.

3

Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV.

Recording One Channel/Watching Another

1

Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 switch. (Make sure the TV is on the Cable Box/DBS output channel, 03 or 04.)

Then, with the VCR in VCR position (the VCR/TV light will appear on the front of the VCR), use the CHANNEL o/p button to select the channel you want to record at the VCR. Start the recording.

2

Press the VCR/TV button once so that the VCR/TV light appears.

3

Select the channel you want to watch at the Cable Box/DBS.

Helpful Hint

•When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the VCR. Set the TV to the Cable Box/DBS output channel (03 or 04).

Image 9

Contents Instruction Book For Customer Use Dear Philips product ownerThis bolt of lightning indi- cates uninsulated material Model No Serial NoSafety Precautions FeaturesIntroduction Declaration of ConformityTable of Contents Using the Remote Control Holder Putting Batteries in the Remote ControlVCR maintenance Erasure PreventionPutting Batteries in the Alarm Clock Using the Alarm ClockUsing the Alarm Clock Holder Setting the Time and the AlarmDisconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemCable Signal ConnectionsRecording/Viewing Any Channel Recording One Channel/Watching Another SignalCable Box/DBS CableHookups With a Stereo TV Turning on Your VCR Press the Menu button until the main menu appears Automatic TV Channel SetupAdding/Deleting Channels Automatic TV Channel Setup cont’dSetting the VCR Clock Your selection will flash on the screen in the AM/PM space Setting the VCR Clock cont’dChoosing a Language Press the EXIT/C. Reset button when you are finishedOFF mode Press the Display button once Count mode Press the Display button once Clock modeOn-Screen Displays Remote Control Buttons Power ButtonRecord Button Remote Control Buttons cont’d Power Light Alarm ClockTimer Light VCR/TV LightFront Panel Back Panel AC Power CordAudio OUT Jack Video OUT JackPlaying VHS Quasi Play Back SqpbRead and follow the steps below to play a tape 1Turn on the TV Insert a tape RecordingStopping an OTR Starting an OTRDetails are on page five Timer RecordingEnter the recording’s start time Repeat the procedure in to set the recording’s end timeTimer Recording cont’d Main menu will appear Cancelling a Timer RecordingCorrecting a Timer Recording To stop recording, press the Stop button VCR/TV light will disappearAntenna Rerecording Copying TapesRepeat Play Press the Play button or the Stop button repeatedly toSelect Auto Repeat Pausing a Picture Forward and Reverse Searching/Pausing a PictureForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPPicture Select Press the Play button to watch the tape Real-Time Counter MemoryAutomatic Playback Features Helpful Hints Helpful Hints cont’d Renewed Dictionary/Specifications SpecificationsDictionary Index Supplied Accessories