ASSEMBLY
Front Tabs Front Tabs
Cowling
Side Tab Side Tab
Shifter Handle | Rear Tab |
9 | Motor |
Harness |
• Press the tab under the back of the seat and lift to remove the seat.
•Make sure the motor harness wires are positioned in the channel to prevent them from being pinched between the cowling and vehicle.
•Fit the rectangular opening in the cowling over the shifter handle.
•Align the front, side and rear tabs on the cowling with the slots in the vehicle. DO NOT snap the tabs into the slots.
PRESS COWLING HERE
To Snap Front Tabs
PULL VEHICLE BODY
UP HERE
ToSnap Front Tabs
10 |
•Press firmly on the front of the cowling to snap the four, front tabs into the slots in the vehicle. Make sure the side and rear tabs stay aligned with the slots.
Note: Pull up on the front of the front end of the vehicle while pressing down on the cowling to make sure the front tabs snap into the slots.
PRESS HERE
To Snap Side Tabs
11 |
•Press firmly on each side of the cowling to snap the four side tabs into the slots in the vehicle. Make sure the rear tab stays aligned with the slot.
PRESS HERE
To Snap Rear Tab
12 |
•Press firmly on the back of the cowling to snap the rear tab into the slot in the vehicle.
11 | |
|
|