ASSEMBLY
WARNING
Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery,
or help in assembly of the vehicle.
Rear Axle
Lock Nut 
1
•Remove the protective caps from each end of the rear axle and throw them away.
•Fit a 3/8"
7/16" Washer
Rear Wheel Driver
Rib
Wheel
Hubcap
2 
7/16" Washer
•Slide a 7/16" washer onto the rear axle.
•Slide a hubcap, indented side down, onto the rear axle.
•Slide a wheel onto the rear axle. Make sure the ribs on the wheel face up.
•Slide a rear wheel driver, ring side down, onto the rear axle. Fit the grooves on the rear wheel driver onto the ribs on the wheel.
•Slide another 7/16" washer onto the rear axle.
Rear Axle
Motor Assembly Pins
Rear Axle Assembly
Motor Assembly
3
•Position the vehicle upright. Face the back end of the vehicle.
•Slide the rear axle assembly into the hole in the opposite side of the motor assembly. Make sure the rear wheel driver on the rear axle assembly fits onto the pins in the motor assembly.
9 | |
|
|