ASSEMBLYDECORATION
21 |
•Insert six #6 x 1" screws into the handlebar assembly, as shown. Tighten the screws.
Grip | Grip |
22 |
•Fit a grip onto each end of the handlebar. If it is difficult to slide the grips onto the handlebar, moisten the grips with warm water first.
Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind:
•Wash your hands before applying the labels.
•Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils.
•Place the labels exactly as shown in the illustrations.
•For best results, avoid repositioning a label once it has been applied to the vehicle.
•After applying a label, rub the label firmly with a clean, dry cloth to make sure the label is adhered to your vehicle. Start at the center of a label, and smooth towards the outer edges to remove air bubbles.
15
9
10
TM
DASH AND REAR VIEW
14 |