Battery Installation

IMPORTANT! Use only a Power Wheels® 6 volt lead-acid rechargeable battery. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels® 6 volt charger before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Failure to follow these instructions may damage your battery and will void your warranty.

Seat

Tab

•Press the tab under the back of the seat and lift to remove the seat.

Slot

Battery Retainer

Arms

•Squeeze the battery retainer arms together to release them from the slots in the vehicle.

•Press the battery retainer arms in and over the lock tabs and lift the battery retainer.

6V Battery

	Motor
3	Harness
3	Connector

•Place the battery upright in the battery compartment.

•Place the foam spacer in the battery compartment, behind the battery.

•Plug the battery connector and motor harness connector together. Push firmly to make sure the two connectors are completely joined.

Slot

Arm Arm

• Lower the battery retainer over the battery.

•Fit the battery retainer arms down into the slots in the vehicle.

•Press the battery retainer arms out over the lock tabs to snap and secure the battery retainer arms in the slots.

•Re-assemble the vehicle seat.

16	R1502a-0920