Abatterytableofchargingcontents

•Plug the charger connector into the battery 1 .

•Plug the charger into a standard volt wall outlet 2 .

Notes:

-If power flow to the wall outlet is controlled by a switch, make sure the switch is “ON”.

-Use the charger only in a wall outlet. Do not plug the charger into a ceiling outlet.

-The power indicator on the charger does not indicate the charge status of your battery. The power indicator allows you to see that there is power from the wall outlet.

•Before first-time use, charge the battery for at least 18 hours. Never charge the battery longer than 30 hours.

•Recharge the battery for at least 14 hours after each use of your vehicle. Do not charge the battery longer than 30 hours.

•Once the battery is charged, pull firmly on the charger connector to disconnect it from the battery. Unplug the charger from the wall outlet. The battery is now ready to be installed in your vehicle. Please see the Battery Installation section on page 16 for detailed instructions on installing your battery. If your battery is already installed in your vehicle, simply re-connect the motor harness connector to the battery.

8	R1502a-0920-