Britax P321900 Switching the Lower Connector System LCS, Verify that the harness is not twisted

Page 30

Child Seat Functions

Switching the Lower Connector System (LCS)

The LCS strap may need to be switched to the proper belt path in rear-facing (Fig. A) versus forward- facing (Fig. B) installations. If a proper connection of the LCS connectors to the LUAS anchors cannot be achieved, complete the following procedure to switch the connectors.

1Lift the front of the child seat cover to access the LCS connectors.

2Pass the LCS connector strap through the belt path on the child’s right side (Fig. C).

3Pass one LCS connector through the appropriate belt path ensuring that the larger part of the connector is on top for the installation procedure you wish to use (Fig D).

Verify that the harness is not twisted.

When installing this child seat in rear-facing mode, the LCS strap must rest behind the child seat buckle strap.

NOTE: To ensure LCS connector is properly aligned with vehicle’s LUAS anchor, the connector’s red release button should face away from vehicle seat back, and the larger of the two connector sections is on top (Fig. D).

4 Replace the cover and continue with the installation procedure.

A

b

C

Release Top Button

D

28

Image 30
Contents Diplomat Page Table of Contents Secure the top tether strap provided with this child seat Page Important Notes Certification RegistrationImportant Harness Adjustments Rear-FacingForward-Facing Child Seat Features 17 19 Vehicle Safety Belts Vehicle Buckle Positions Vehicle Seating PositionsLower Universal Anchorage System Luas Installation Rear-facing belt slot Fig. BIntended Lap-Shoulder Belt Installation Vehicle belt can be routed over or under the coverInstallation Rear-facing Lap-Belt Installation Intended Lower Universal Anchorage System Luas Installation Top Vehicle belt, then from the shoulder portion Fig. D Pouch. See pages 25 Lap-Belt Installation Installation Forward-Facing Aircraft Installation Safety Information Using the Versa-Tether Tether Connector Strap Switching the Lower Connector System LCS Verify that the harness is not twistedStoring the LCS Connectors Infant Body PillowChest Clip Harness BuckleHow to Adjust Harness Height Securing Your ChildChild Seat Functions Cover Removal Yoke on the rear of the child seat Fig. ERefitting the Cover Harness Buckle Removal Re-threading the Harness BuckleCleaning the Harness Buckle Warranty Double Check Car Seat-to-Vehicle Installation