Britax P321900 manual Secure the top tether strap provided with this child seat

Page 4

WARNING!

DEATH or SERIOUS INJURY can occur if the following are not observed :

Use only with children who weigh between 2.3 – 18.1 kg (5 – 40 lbs) and whose height is between 55.9 – 101.6 cm (22 – 40 in.).

Use rear-facing for children who weigh between 2.3 – 13.6 kg (5 – 30 lbs) and whose height is between 55.9 – 76.2 cm (22 – 30 in.)

Use forward-facing for children who weigh between 9.1 – 18.1 kg (20 – 40 lbs) and whose height is between 68.6 – 101.6 cm (27 – 40 in.).

This child seat must be in the recline position when installed rear- facing.

This child seat must be in the upright position when installed forward-facing.

Adjust the belts provided with this child seat so they fit snugly around your child. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position.

Secure the top tether strap provided with this child seat.

The child seat must be secured to the vehicle by means of a lower connector system if it is installed in a seating position that is equipped with a lower universal anchorage system or by means of a vehicle seat belt if it is installed in a seating position that is not equipped with a lower universal anchorage system, and by means of a tether strap, as shown in the installation instructions. Use of the tether strap is required forward-facing and is optional rear-facing.

Follow all instructions on the child seat labels and in this user guide.

2

Image 4
Contents Diplomat Page Table of Contents Secure the top tether strap provided with this child seat Page Important Notes Certification RegistrationImportant Harness Adjustments Rear-FacingForward-Facing Child Seat Features 17 19 Vehicle Safety Belts Vehicle Buckle Positions Vehicle Seating PositionsLower Universal Anchorage System Luas Installation Rear-facing belt slot Fig. BIntended Lap-Shoulder Belt Installation Vehicle belt can be routed over or under the coverInstallation Rear-facing Lap-Belt Installation Intended Lower Universal Anchorage System Luas Installation Top Vehicle belt, then from the shoulder portion Fig. D Pouch. See pages 25 Lap-Belt Installation Installation Forward-Facing Aircraft Installation Safety Information Using the Versa-Tether Tether Connector Strap Switching the Lower Connector System LCS Verify that the harness is not twistedStoring the LCS Connectors Infant Body PillowChest Clip Harness BuckleHow to Adjust Harness Height Securing Your ChildChild Seat Functions Cover Removal Yoke on the rear of the child seat Fig. ERefitting the Cover Harness Buckle Removal Re-threading the Harness BuckleCleaning the Harness Buckle Warranty Double Check Car Seat-to-Vehicle Installation