How to Adjust Harness Height, Securing Your Child

Child Seat Functions

How to Adjust Harness Height

IMPORTANT: See Important Harness Adjustments on pages 6–7 for instructions on proper harness fit based on your child’s height and weight.

1Loosen the harness by lifting the harness adjuster lever while pulling the harness straps forward as far as possible (Fig. F).

2Rotate the head restraint adjustment knob on either side of the child seat to raise or lower the head restraint and harness (Fig. G).

NOTE: DO NOT force the head restraint adjustment knob in either direction. If the knob is difficult to turn, the head restraint may be at maximum or minimum height, the harness may be tight, or the child’s weight is pressing against the head restraint cover.

Securing Your Child

1Loosen the harness by pressing the adjuster button located on the front of the child seat, then pull the shoulder straps forward (Fig. F).

2Release the chest clip by squeezing the tabs and sliding pieces apart (Fig. H).

3Unfasten the harness buckle by pressing the release button and sliding the tongues out (Fig. E).

4Move the harness straps to the side of the child seat. Use the harness holder located on the straps and side of the cover to aid in holding the straps.