Care and Maintenance
Cover Removal
WARNING! Do not take apart the harness. Never remove the buckle tongues from the harness. They cannot be reattached after removal. If reassembled incorrectly, the child seat may not perform as
intended.
1Remove the infant body pillow.
2Loosen the harness by lifting the harness adjuster
| lever while pulling both shoulder straps forward |
|
| as far as possible. |
|
3 | Unhook the shoulder straps from the harness |
|
| yoke on the rear of the child seat (Fig. E). | e |
4 | Pull the upper harness straps through the head | |
| restraint and cover to the front of the child seat. |
|
5Remove the buckle and belly pad. See page 35.
6Remove the head restraint portion of the cover. Be careful not to damage the
7Remove the
8Gently remove the upper portion of the cover by pulling it around the head restraint to the front.
9Pull the lower harness straps, buckle tongues, HUGS™ chest pads, and chest clip through the lower slots in cover.
10Remove the entire cover from the child seat.
33