Allstar Products Group ANSI/UL 325 owner manual Installing the Operator, Tools Required

Page 9

C:INSTALLING THE OPERATOR

TOOLS REQUIRED

The following tools and materials are required for a proper installation of the GS4000.

1.Wire cutter, stripper and crimping tools. (For attaching accessory equipment to the control box barrier strip.)

2.A #2 Phillips Head screw driver for removing the screws to the High Voltage cover.

3.Medium standard straight blade screw driver for the terminal strip screws.

4.Very small blade screwdriver. (For adjusting the potentiometer on the Logic and Power board.)

5.Electric arc welder or an electric drill with a 3/8" bit. (For attaching Arm Bracket to the Gate.)

6.Several feet of #18 or #22 gauge insulated multistrand wire. (For connecting accessory equipment to the control box terminal strip, and for limit switch control wires.)

7.Four 1/2" diameter concrete "redhead" bolts with hex nuts, flat washers and lock washers. (For attaching the GS4000 to the concrete pad.) (Not Included)

8.Concrete drill and bit. (To drill mounting holes for concrete bolts.)

9.Multimeter. (To test line voltage and other measurements as necessary.)

10.Small level. (To level GS4000 at installation.)

11.Torque Wrench and 1-5/8” Socket

UNPACKING

CHECKLIST

The GS4000 as shipped consists of the components listed below.

Mechanical Unit

Swing Arm Kit

 

Swing Arm

Electrical Unit

Crank Arm

 

Crank Arm Extension

Wood Pallet with 4 lag bolts

Swing Gate Fittings

 

Swing Arm Bracket

Instruction Kit

Swing Arm Padlock with keys

Instruction Manual

Hardware Package

Warning signs

 

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Gate Star WA R N I N G H I G H V O LTA G E Table of ContentsConnections for External Entrapment Prevention Sensors PRE-INSTALLATION NotesPinch Points Entrapment Zone Electric Gate Edge Gate System Design and Installation Safety Check ListAS the Installer YOU are Responsible for Gate System Design InstallationMoving Gate DeathPreparing the Site Concrete PADPlacing the Vehicle Detector Loops Vehicle Detector Loop Blanking for Swing Gates Loop DiagramsElectrical Power Requirements Other Voltages and 3 Phase SystemsService Conduit Tools Required Installing the OperatorPlacing the GS4000 Mechanical Unit Installing the GS4000 ARMElectrical Hook UP Installing the GS4000 Control BOXWiring the Mechanical Unit to the Control BOX Connecting the AC Wiring Volt InstallationsRight Hand and Left Hand Installation Additional Lightning ProtectionBI-PARTING Wiring Accessory Equipment HOOK-UPBi-Parting Installation Limit & Motor Wiring Diagram Wiring Radio Receivers to the Terminal Strip Four Wire ReceiversWiring a 3-BUTTON Station Connecting the Vehicle Detector Wiring a KEYPAD, Card Reader or Telephone Entry SystemWiring Vehicle Detectors Vehicle Detector PowerConnecting the Loop Wires Presetting the Motor Overload Sensitivity PotentiometersClose SwitchShadow Loop Close PhotoSetting the Switch Selectable Options Setting the Limit SwitchesNO-LOAD Test Mode OPEN/CLOSE Push Button ENABLE/ Disable Patent no ,611,205Timer to Close Setting Applying Power to the GS4000Indicator Lamps PRE Running Checklist Starting the Operator Final SettingsSmart Setting Maximum RUN Timer Final Setting of the Close TimerFinal Setting of the Motor Overload Sensitivity Installation Notes for Auxiliary EquipmentTo the Owner/End User of Allstar’s GS4000 Precautions for Pedestrian Traffic or Residential AreasBasic Operational Guide Entrapment ZonePinch Points Entrapment Zone GS4000 Mechanical Unit Exploded View Mechanical Unit Exploded ViewARM KIT & Control BOX Exploded View & Parts Mechanical Unit Parts ListPhysical Drive Technical Specifications

ANSI/UL 325 specifications

Allstar Products Group is a prominent manufacturer in the realm of access control and safety products, and its commitment to quality is evidenced by its compliance with ANSI/UL 325 standards. These standards are essential for ensuring the safety and reliability of automatic gates and their related components, focusing on minimizing risks associated with entrapment and injury.

One of the key features of Allstar's ANSI/UL 325 compliant products is their advanced safety mechanisms. These include integrated sensing technology that detects the presence of objects or obstacles in the path of the gate, effectively preventing accidents. This safety technology often encompasses features such as photo eyes and edge sensors that can immediately halt or reverse the movement of a gate if an obstruction is detected.

Additionally, Allstar’s product range is notable for its robust design and durability. Built to withstand various environmental conditions, these products use high-quality materials that ensure longevity and reliability, meeting the stringent demands of both residential and commercial applications. The designs are also forward-thinking, incorporating user-friendly features that allow for easy installation and maintenance.

Another characteristic that sets Allstar apart is their integration of advanced technologies. Many of their products support smart technology, enabling users to control their gates through mobile applications or remote access systems. This integration allows for convenience and enhanced security, providing real-time alerts and status updates.

Allstar Products Group also emphasizes compliance to facilitate peace of mind for users. All their ANSI/UL 325 certified products undergo rigorous testing procedures to ensure they meet the stringent safety and performance requirements set forth by the American National Standards Institute and Underwriters Laboratories. This adherence to such standards not only assures consumers of reliability but also aligns with the industry’s best practices.

In conclusion, Allstar Products Group’s ANSI/UL 325 compliant products exemplify cutting-edge safety features, robust construction, and advanced technology integration. Their commitment to quality and safety ensures that customers can enjoy the benefits of automatic gate systems with confidence, knowing that they adhere to the highest safety standards in the industry.
Top Page Image Contents