SETTING FILE NAMES & PRINTING ORDER
CHOOSING THE PICTURES FOR PRINTING
You can select images for printing and specify the number of print copies. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print function compatible printer.
1.Insert an SD card and transfer the files from internal memory to SD card.
2.Press 
to enter review mode.
3.Press the MENU button.
4.Press the 
or 
to select Print.
5.Press the OK button to enter its
6.Press the 
or 
button to select On.
7.Press the 
or 
button button to select Order, then press OK. The top side of the LCD shows as below:
|
|
|
|
|
Number | of |
| Total number | |
copies of the |
| of copies | ||
current picture |
|
|
| |
8.Press the 
or 
button to set the number of copies (from 0 to 99).
9.Press the 
or 
button to search for the other pictures to be printed. Then press the 
or 
button to set the number of copies. The total number of copies will be shown on the LCD.
Note: Video clips cannot be printed. The message “Function not supported” will appear if the file that you are trying to set print order is video clip.
When the setting is complete, turn the camera off and take the SD card out for printing. Or connect the camera with a
RESETTING THE PRINT ORDER
The print settings can all be removed.
1.Insert an SD card and transfer the files from internal memory to SD card.
2.Press 
to enter review mode.
3.Press the MENU button.
4.Press the 
or 
to select Print.
5Press the 
or 
button button to select Reset then press OK to enter its submenu.
6. Press OK again to confirm. The print setting will be removed.
28