Pelco DD53TC16-X manual Patterns, Quick Programming Guide

Patterns

SPECTRA III

LANGUAGEENGLISH

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can be recalled with a command from a controller or automatically by a programmed function (alarm, park or power-up).

The Spectra III can handle one user-defined pattern. Pattern length is based upon memory usage rather than a fixed amount of time.

To program a pattern:

1.Use the joystick to position the cursor beside PROGRAM PATTERN.

2.Press Iris Open. The Patterns programming window appears on the monitor.

3.Follow the directions displayed on the monitor.

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS>

<ZONES>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>

BACK

EXIT

PATTERNS

PATTERN NUMBER	1
<PROGRAM PATTERN>
<CLEAR PATTERN>
BACK
EXIT
REFERENCE INFORMATION
PATTERN USAGE	0%
REMAINING	100%

*This setting only applies to Pressurized Spectra III dome systems with software version 1.25 or higher.

After a pattern is programmed, the remaining storage percentage is displayed on the screen.

To clear a pattern:

1.Use the joystick to position the cursor beside CLEAR PATTERN.

2.Press Iris Open.

3.Follow the directions displayed on the monitor.

NOTE: When programming one or more presets within a pattern, use the normal controller commands to Call a Preset.

Quick Programming Guide

(See page 11)

C2446M-E (11/05) 29