SYSTEM INFORMATION
SPECTRA III
LANGUAGEENGLISH
<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS> ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
SYSTEM INFORMATION
DOME DRIVE MODEL | DD53TC16 |
BACK BOX MEMORY | NONE |
SOFTWARE VERSION | XX.X |
BIOS VERSION | XX.X |
FONT VERSION | XX.X |
COMM | 2400, N, 8, 1 |
D ADDRESS | 1 |
P ADDRESS | 2 |
CM9500 MODE | OFF |
32 PRESETS | OFF |
PROTOCOL | C |
PRESSURIZED* | X.XX |
<ADDITIONAL> |
|
BACK |
|
EXIT |
|
ADDITIONAL
FREE MEMORY |
| 18304 |
LAST RESET |
| POWER ON |
AZIMUTH ZERO OFFSET | 0o | |
MOTOR ACTIVE |
| YES |
CAMERA ACTIVE |
| YES |
FPGA VERSION |
| X |
VIDEO LEVEL |
| NORMAL |
CAMERA |
| |
LANGUAGE 1 |
| ENGLISH X.XX |
LANGUAGE 2 |
| ESPANOL X.XX |
LANGUAGE 3 | PORTUGUES X.XX | |
LANGUAGE 4 |
| DEUTSCH X.XX |
LANGUAGE 5 |
| FRANCAIS X.XX |
LANGUAGE 6 |
| ITALIANO X.XX |
BACK
EXIT
*This setting only applies to Pressurized Spectra III dome systems with software version 1.25 or higher.
The system Information screen displays dome drive model, software version, available memory, and other diagnostic information.
System settings cannot be changed using this screen. This screen is for reference only.
Use the following steps to display the System Information screen:
1.Use the joystick to position the cursor beside SYSTEM INFORMATION.
2.Press Iris Open. The SYSTEM INFORMATION window opens.
14 |