JAI CV-M50 Pin Assignment, Pin Multi-connector DC-IN/SYNC, Pin Multi-connector Trigger

CV-M50

5. Pin Assignment

5.1.12-pin Multi-connector (DC-IN/SYNC.)

Type: HR10A-10R-12PB-01 (Hirose) male Seen from rear.

Pin1no.	Signal				Remarks
5	GND	ParallelwiththeBNCvideooutput.Avoiddoubletermination.
423	+12VideoDCinput
67	HDVinput/output	HDV	inasfactorysetting.*1)		*2)
8	+12VGNDNCDCinput	NCasfactorysetting.Pixelclockoutput.*1)
1290
Notes:
*1) Signals on pin no. 6, 7 and 9 can be changed by jumper setting.						Remarks
Seen from rear.	Pin1no.			SignalNC
See “7.3. Jumper Settings” for more information.
*2) In Edge Pre-select and Pulse Width Control mode do not input ext. VD signal.
	64235			ExtWENEEN.TrigGNDNCoutputoutputinput	*Note*Note
5.2. 6-pin Multi-connector (TRIGGER)

Type: HR10A-7R-6PB (Hirose) male

* Notes:

The functions available on the 6-pin multi-connector are not effective in long time exposure mode.

- 5 -