JAI operation manual Installation Camera Setup Pin Configurations, 1 a 12-Pin Connector TM-6710

Page 5

Installation

2.2 Camera Setup

2.2.1Pin Configurations

2.2.1 (a) 12-Pin Connector (TM-6710)

The TM-6710 has a 12-pin connector for power input. Pin #1 is Ground and Pin

#2 is +12V DC. The other pins handle a number of other input and output		1	9
	2	10	8
functions, as detailed below.

Pin	Description	Pin	Description
1	GND (Power)	7	VD In
2	+12V DC	8	N/C
3	GND (Analog)	9	HD In
4	Video Out	10	RXD (RS-232)
5	GND (Digital)	11	Integration
6	VINIT In	12	TXD (RS-232)

3 11 12 7

4 5 6

2.2.1 (b) 12-Pin Connector (TM-6710CL)

The TM-6710CL has a 12-pin connector for power input. Pin #1 is ground and Pin #2 is +12V DC. The pinout table is shown below. For the TM-6710CL, serial communication camera control is done via the Camera Link connector on the rear panel of the camera.

Pin	Description	Pin	Description
1	GND (Power)	7	VD In
2	+12V DC	8	N/C
3	GND (Analog)	9	HD In
4	Video Out	10	RXD*
5	GND (Digital)	11	Integration†
6	VINIT In†	12	TXD*

*. Optional TTL serial communications.

†.VINIT and Integration can be controlled via Camera Link. When Camera Link is connected for these uses, do not use the 12-pin connector inputs.

TM-6710/6710CL High-Speed Progressive Scanning CCD Camera