JAI TM-6710 operation manual Troubleshooting

Page 35

Page 29

Troubleshooting

5Troubleshooting

5.1Problems and Solutions

Following are troubleshooting tips for common problems. Generally, problems can easily be solved by following these instructions. If the following remedies fail to offer a solution to your problems, please contact a PULNiX representative.

5.1.1Symptom: No Video

Remedies: Check that the following are properly connected and operational.

Power supplies

Power cables

Main power source

Shutter control

Async mode

Lens

Proper level setting as Camera Link CC1 and CC2

5.1.2Symptom: Dark Video

Remedies: Check that the following are properly connected and operational.

Shutter selection

Iris opening on the lens

Proper power (DC level)

5.1.3Symptom: Non-Synchronized Video

Remedies: Check that the following are properly connected and operational.

Proper mode output

Frame grabber software camera selection

5.1.4Symptom: RS-232 Non-Communication

Remedies: Check that the following are properly connected and operational.

Cable connection

Proper serial port selection

Camera has power

Proper Camera Link DLL selection (for TM-6710CL)

TM-6710/6710CL High-Speed Progressive Scanning CCD Camera

Image 35
Contents TM-6710/6710CL High-Speed Progressive Scanning CCD Camera Page TM-6710/6710CL High-Speed Progressive Scanning CCD Camera WarrantyCertifications CE CompliancePage Ii Table of Contents InstallationIii List of Figures Product Description FeaturesIntroduction Applications IntroductionTM-6710 System Configuration Introduction System ConfigurationGetting Started Unpacking Instructions InstallationInstallation Accessories and Options1 b 12-Pin Connector TM-6710CL Installation Camera Setup Pin Configurations1 a 12-Pin Connector TM-6710 Camera Link Connector 1 c 51-Pin ConnectorMDR 26-Pin Connector 0226-622VC Power Supply and Power Cable SetupCS-232-B912 3 RS-232 Cables and Connectors TM-6710 onlyAttaching the Camera Lens Back-Focusing the LensAttaching the Video Output Analog Output on TM-6710 Only Rear Panel OperationOperation Dual-Tap Video OutputRear Panel Layout TM-6710CL Pin Power Modes of Operation Shutter Operation Operation Mode Control Switches TM-6710Mode Control Switch Up/Down Switch Shutter Control Asynchronous Reset with ShutterExternal Sync Input Schematic Operation External SynchronizationVinit Input Schematic External Pulse Width Control ModeInternal Slow Reset Mode Internal Fast Reset ModeIntegration Partial Scan ModeOperation Progressive Scanning Progressive scanning quad speed output normal modeRS-232C Communication Default Condition Async Shutter Mode RS-232C Control CommandsCommand S Manual Shutter ModeCommand Command GCommand R Command WCommand L Command C Report from pages RP 0-6 command. Camera responds1st Char 2nd Char RS-232C Control Commands Summary TableTiming Operation Video OutputPixel Clock Frame Data ValidCamera Timing Charts Camera Timing ChartsAsync Reset Timing 38 P, 1.49 µsec H, 6 µsec 254 H, 8.33 msec 5 H, 147.6 µsec Troubleshooting Troubleshooting Information and Support Resources Appendix SpecificationsSpecifications Table AppendixTM-6710 Physical Dimensions Glass Specifications TM-6710 Block Diagram Appendix Block DiagramsPage Email imaging@jaipulnix.com